Asset and application profile: ABB SACE E3H 32
ABB SACE E3H 32 is identified here by its complete designation. This page helps align the requested item with its site duty, interfaces and commissioning evidence; a family label alone is insufficient for substitution.
Technical data and configuration boundaries
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | SACE E3H 32 |
| Product family | SACE E3H |
| Component role | Emax air circuit breaker |
| Frame | E3H 32 |
| Rated current | 3200 A frame reference |
| Breaking capacity | 100 kA at 415 V family reference |
| Short-time withstand | 75 kA for 1 s family reference |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
Treat the figures and descriptions for SACE E3H 32 as verified selection references, then check the specific unit nameplate, official drawing and ordered options before installation.
Risk and installation controls
An installation involving SACE E3H 32 should follow the site isolation and permit process. Preserve the approved settings, drawings and test records before removing the old device.
Fit SACE E3H 32 only after the mechanical, electrical and environmental boundaries are understood. Check protective devices and termination torque against the applicable ABB instructions.
Where this item fits
The practical purpose of SACE E3H 32 is to protect and switch the engineered low-voltage feeder. Identify the plant tag, controlled equipment and operating condition so the request describes a real application rather than a generic spare.
For SACE E3H 32, record whether the work is a planned replacement, a new installation or an emergency stock replenishment. Each route changes the evidence needed before release.
Proof of operation
For the SACE E3H 32 handover, perform approved primary/secondary injection and interlock checks. Document readings, operator observations and any exceptions before normal service is restored.
Archive the final SACE E3H 32 configuration, software or hardware revision and acceptance sign-off so future maintenance has a trustworthy baseline.
Interface comparison
Before accepting SACE E3H 32, compare trip unit, sensor, poles, drawout accessories, busbars and coordination study. A difference in an apparently minor suffix can change the installation or communication behavior.
Photograph the existing SACE E3H 32 nameplate and connections when possible. Keep the comparison with the work order, including any required adapter or accessory.
Other designations in this family
The following SACE E3H codes are grouped for search and enquiry with ABB SACE E3H 32. They may have different ratings, firmware, approvals or accessories and are not automatically interchangeable.
No additional unassigned SACE E3H code is grouped under SACE E3H 32 at present.
Order and service handoff
State the exact ABB SACE E3H 32 code, plant tag, critical ratings and required documentation on the enquiry. Request confirmation of revision and accessory scope before dispatch.
On receipt, compare SACE E3H 32 against the approved request and hold any mismatch for engineering review. Keep the tested configuration with the asset record.
