What to verify before ordering ABB TP180IA (1SBN020301R1001)
ABB TP180IA (1SBN020301R1001) selection begins with the exact device identity and its assigned function. The values in the following table are a starting point for checking the delivered unit, not a substitute for the nameplate.
Technical identification and decision points
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | TP180IA (1SBN020301R1001) |
| Product family | TP-IA |
| Component role | pneumatic off-delay contactor accessory |
| Type | TP180IA |
| Order code | 1SBN020301R1001 |
| Timing action | Pneumatic off-delay |
| Adjustment | 10–180 s catalog range |
| Mounting | Check compatible contactor and accessory position |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
Confirm ABB TP180IA (1SBN020301R1001) against the current ABB documentation and the actual plant duty. A range or capability from another variant must not be assumed for this exact build.
Equipment duty and scope
ABB TP180IA (1SBN020301R1001) is considered where the site needs to hold the selected auxiliary timing function after coil release. Record the asset tag, circuit or loop boundary, and reason for the change before specifying a replacement.
The ABB TP180IA (1SBN020301R1001) procurement request should distinguish the physical device from any separate accessories, configuration files, protection devices and installation materials.
Failure and mismatch review
If ABB TP180IA (1SBN020301R1001) was requested after a fault, document the symptom and tests that separated component failure from wiring, supply, configuration or upstream protection problems.
If the delivered ABB TP180IA (1SBN020301R1001) differs from the ordered complete designation, hold it for engineering comparison. Do not treat a family name as an interchangeability approval.
Interface evidence
Before ABB TP180IA (1SBN020301R1001) is ordered, compare required off-delay, contactor fit, circuit timing and ambient conditions. Capture the installed nameplate, a clear terminal photograph and the cabinet drawing revision.
A visual resemblance to ABB TP180IA (1SBN020301R1001) is not proof of equivalent contacts, voltage, communication, release, connector orientation or certification.
Purchasing handoff
Quote ABB TP180IA (1SBN020301R1001) exactly and attach the current ABB reference alongside the equipment label. Ask the supplier to state any order-code, revision or accessory differences.
Keep a traceable ABB TP180IA (1SBN020301R1001) comparison with the installed part and require written approval for alternatives that change electrical or control behavior.
Work package
The ABB TP180IA (1SBN020301R1001) work package needs isolation, access, disconnection and restoration steps approved for this plant. Preserve the original wiring marks and any usable settings backup.
During ABB TP180IA (1SBN020301R1001) installation, verify adjacent equipment clearance and protective bonding without altering an approved design solely to fit a substitute.
Commissioning evidence
After fitting ABB TP180IA (1SBN020301R1001), time the output after an approved coil-release test. Use the site's approved safe test procedure and observe all connected interlocks and indications.
Log the ABB TP180IA (1SBN020301R1001) serial or revision, test result, date, and witness. Restore normal operating mode only after the relevant process owner accepts the change.
Related configurations in this series
These TP-IA references belong to the same product grouping as ABB TP180IA (1SBN020301R1001), but ratings and included parts can differ. Match the entire designation before treating one as a replacement.
- TP40IA (1SBN020301R1000)
Acceptance record
For ABB TP180IA (1SBN020301R1001), retain the final order code, supplied revision, installation findings and functional test evidence.
If ABB TP180IA (1SBN020301R1001) is rejected or substituted, keep the reason and the approved disposition with the asset record.
