TSA101-A1-S1-D6-P5-S1-D1-H5-CE technical selection worksheet

Use the complete TSA101-A1-S1-D6-P5-S1-D1-H5-CE designation when requesting this exchangeable temperature measuring insert. The installation must be checked against the actual equipment marking, because a shared product family does not establish identical ratings, options or approvals.

Key technical data

This table identifies the published family facts for TSA101-A1-S1-D6-P5-S1-D1-H5-CE. Treat any unlisted option as a selection question, not as an implied specification for TSA101-A1-S1-D6-P5-S1-D1-H5-CE. Consult the current ABB data and the installed nameplate before release.

What the device does

The work assigned to TSA101-A1-S1-D6-P5-S1-D1-H5-CE is specific: Restore the temperature measurement while retaining the compatible thermometer installation. Record the controlled process, feeder or network point in which TSA101-A1-S1-D6-P5-S1-D1-H5-CE operates.

Check the upstream source and the downstream load or signal as a complete path. For TSA101-A1-S1-D6-P5-S1-D1-H5-CE, an apparently matching connector or housing does not establish functional equivalence.

Installation boundary

Before fitting TSA101-A1-S1-D6-P5-S1-D1-H5-CE, isolate the process or electrical system under the site procedure and check the drawing, connection, mounting and environmental limits.

Document the original terminals and settings for TSA101-A1-S1-D6-P5-S1-D1-H5-CE. Reapply only approved wiring and parameter changes; retain the previous unit identification for traceability.

Match the ordered configuration

The most important purchase question for TSA101-A1-S1-D6-P5-S1-D1-H5-CE is: Compare insert diameter and length, element wiring, sensor class, head terminals and transmitter input before ordering. Record any missing suffix, revision, calibration or approval with the supplier.

Ask whether the offered TSA101-A1-S1-D6-P5-S1-D1-H5-CE item includes the required terminals, accessories and documentation. Any suggested substitute needs a line-by-line comparison, not an assumption based on the family prefix.

Commissioning evidence

The practical acceptance check for TSA101-A1-S1-D6-P5-S1-D1-H5-CE is: Check continuity, insulation and reference-temperature response after fitting the insert. Capture actual readings, states or faults rather than reporting only that the device powered up.

Close the work order for TSA101-A1-S1-D6-P5-S1-D1-H5-CE with the observed test result, final configuration and responsible reviewer. If a safety or protective function is involved, follow the site-specific validation procedure.

Other codes within this series

The following TSA101 designations are grouped on the TSA101-A1-S1-D6-P5-S1-D1-H5-CE page to aid searches and enquiries. They may differ in rating, options, protocol or dimensions. Confirm each full designation before substitution.

• TSA101-A1-S1-D6-P5-S1-D1-Y1-CE
• TSA101-Y0-D1-D6-P2-B2-W4-Y1-M5 (350MM)
• TSA101.A4.D1.D6.P1.B2.Z9.Y2 (385MM )
• TSA101.A4.D1.D6.P1.B2.Z9.Y2 (485MM )
• TSA101.Y0.D1.D6.P5.B2.Z9.Y1 (438MM )
• TSA101.Y0.S1.D6.P2.B2.Z9.Y1 (15CM)
• TSA101.Y0.S1.D6.P5.S1.W4.Y1.C4.C6.CE.V8.M 5.T1 M=540MM
• TSA101.Y0.S1.D6.P5.S1.W4.Y1.C4.C6.CE.V8.M5.T1 ( 540MM )
• TSA101.Y0.S1.D6.P5.S1.W4.Y1.C4.C6.CE.V8.M5.T1 M=540MM
• TSA101.Y0.S1.D6.P5.S1.W4.Y1.C4.C6.CE.V8.M5.T1 M=550MM
• TSA101.Y0.S1.D6.P5.S1.W7.Y1.C4.C6.CE.V8.M5.T1 M=640MM
• TSA101.Y0.T1.D6.K1.T2.Z9.H6.AZ.CF.P5. V6.M5. T1

Enquiry details to send

Quote TSA101-A1-S1-D6-P5-S1-D1-H5-CE exactly, then state the installed equipment, required quantity, delivery location and whether a new unit or an approved service spare is needed.

For TSA101-A1-S1-D6-P5-S1-D1-H5-CE, request the current datasheet, option confirmation and lead time. On receipt, compare the supplied marking to the approved enquiry and retain the commissioning notes with the equipment record.