Identify TU814V1 3BSE013233R1 before replacement
TU814V1 3BSE013233R1 is a compact S800 I/O termination unit for a defined industrial installation. When requesting TU814V1 3BSE013233R1, keep its complete printed designation, hardware revision and project context together so that purchasing and engineering review the same component.
Technical identification and selection data
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | TU814V1 3BSE013233R1 |
| Product family | TU814V1 |
| Component role | compact S800 I/O termination unit |
| Channels | 16 |
| Voltage class | 50 V |
| Connection | Crimp snap-in connector |
| Ordering | Confirm TU814V1 and 3BSE013233R1 together |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The TU814V1 3BSE013233R1 data above identifies the published function and key selection checks. A rating or connection shared with another device does not establish an approved replacement for TU814V1 3BSE013233R1.
Where this item works
For TU814V1 3BSE013233R1, the intended duty is: Connect the field interface to a compatible S800 I/O module through the specified snap-in termination. Capture the actual connected load or signal, site environment and operating sequence before purchase.
The installation record for TU814V1 3BSE013233R1 should include a nameplate photograph, panel drawing and the failed unit's setting or software version when applicable.
Match the interface before ordering
The critical cross-check for TU814V1 3BSE013233R1 is: Verify connector assembly, keying, module compatibility and cable schedule rather than substituting a screw-terminal MTU. A similar product outline, series name or current class alone is not enough.
Ask the supplier to identify any deviations from TU814V1 3BSE013233R1 in connection hardware, function, approvals and accessories. Resolve them against the engineering drawing before accepting a substitute.
Installation and return-to-service proof
For TU814V1 3BSE013233R1, the controlled acceptance method is: Check ModuleBus recognition, wiring continuity and a representative signal on each used channel. Record the actual results, not merely a pass/fail impression.
Before returning the equipment containing TU814V1 3BSE013233R1 to production, verify isolation, protective coordination, terminal identification and any interlock or safety-related response.
Same-series ordering references
These codes share the TU814V1 grouping with TU814V1 3BSE013233R1, but option strings can alter ratings, wiring, firmware or certifications. They are not automatically interchangeable with TU814V1 3BSE013233R1.
No additional unassigned TU814V1 code is recorded here for TU814V1 3BSE013233R1.
Buyer handover record
Quote TU814V1 3BSE013233R1 in full, state quantity and destination, and attach the relevant panel photograph and drawing. Confirm whether accessories are included in the offered supply.
At receipt, compare the supplied label with TU814V1 3BSE013233R1 and document any difference before installation. Retain the final part identity and the TU814V1 3BSE013233R1 acceptance test with the asset history.
