ABB UMC22-PAN application questions and verified data
Use the ABB UMC22-PAN identification below as the initial technical checkpoint for a real installation. Any incomplete suffix or coil notation must be resolved against the delivered label.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | UMC22-PAN |
| Product family | UMC22-PAN |
| Component role | UMC22 motor-controller operator panel |
| Type | UMC22-PAN |
| Order code | 1SAJ510001R0002 |
| System | UMC22-FBP |
| Functions | Local motor status, setting and diagnostics |
| Compatibility | Do not substitute UMC100-PAN without system review |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The ABB UMC22-PAN values describe the cited catalog reference. Verify nameplate details and plant conditions before treating them as acceptance limits.
Which inputs determine the correct order?
For ABB UMC22-PAN, confirm UMC generation, door mounting, extension cable and access policy. Photograph the installed label and terminals before any disconnection.
The exact ABB UMC22-PAN designation matters: coil code, pole arrangement, enclosure, processor revision or protocol may change despite a similar appearance.
How do ratings become a site decision?
Compare the ABB UMC22-PAN verified values in the table with the real supply, load, environment and installation. A catalog capability only applies under its stated conditions.
If ABB UMC22-PAN lacks a verified option or rating for this plant, obtain ABB documentation or written engineering approval before ordering.
What work is assigned to this part?
ABB UMC22-PAN is requested to provide local motor-control status and settings access. Define the specific motor, circuit or controller tag and the event that prompted the replacement.
Keep the ABB UMC22-PAN request bounded to the component and its documented accessories. A change to control logic or protection settings is a separate engineering decision.
How should purchasing treat an alternative?
For ABB UMC22-PAN, the RFQ should include the complete model, approved article number where available and the equipment label. State required accessories separately.
A proposed substitute for ABB UMC22-PAN needs a comparison of ratings, fit, approvals, control interface and commissioning effort before acceptance.
What must be preserved during replacement?
Before ABB UMC22-PAN is removed, retain cable identification, setting files, drawings and a baseline of normal indications. Follow the plant's energy-isolation procedure.
Fit ABB UMC22-PAN with the specified clearances, grounding, terminals and protective devices. Do not modify other equipment merely to accommodate a different variant.
Which checks prove the installation?
After approved installation of ABB UMC22-PAN, check status, diagnostic display and authorized settings. Include connected interlocks and all states that the process owner requires.
Record the ABB UMC22-PAN serial or revision, test conditions, observed results and witness. Return the plant to normal only after sign-off.
Same-series models to discuss with the supplier
The following UMC22-PAN references are grouped with ABB UMC22-PAN. They are not automatically interchangeable; compare each full code and its electrical, mechanical or software options.
No other unassigned UMC22-PAN code is grouped with ABB UMC22-PAN in this release.
Final handover
Keep the ABB UMC22-PAN selection evidence, ordered code, installed label and test report together with the equipment record.
Where ABB UMC22-PAN is part of a safety or production-critical circuit, retain the approved rollback plan and operating authorization.
