X20DOF322 installation map and selection boundaries
Identify X20DOF322 by its complete marking before ordering. X20DOF322 is a sixteen-output X20 digital module within an engineered system, so the connection and project context matter as much as the family name.
Verified technical identity
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | X20DOF322 |
| Product family | X20DOF322 |
| Component role | sixteen-output X20 digital module |
| Outputs | 16 digital outputs |
| Circuit | 24 V DC source, 1-wire connections |
| Nominal channel current | 0.5 A |
| Terminal | X20TB1F; check bus base |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The X20DOF322 entries above are the starting points for selection. Check the exact nameplate and current manufacturer documents for options or revisions not expressed by the short type code.
Acceptance evidence
The site test for X20DOF322 should include: Test every output with the approved control sequence and inspect fault diagnostics. Save the observed values, status indications and responsible reviewer's approval.
For equipment containing X20DOF322, document any parameter restore, wiring change, safety check or protective-setting check before release to normal operation.
System interface
X20DOF322 serves this duty: Switch sixteen discrete field loads where the cabinet wiring uses the one-wire topology. Draw the path from supply or network through X20DOF322 to the connected load or signal.
Record the real terminal positions, connected cable, controller or protection logic, and the environmental conditions around X20DOF322. These define the acceptance boundary for a replacement.
Order-code questions
Before buying X20DOF322, resolve this critical match: Check aggregate load, field power, output map and terminal layout before replacement. Request an explicit statement of any hardware, firmware or accessory difference.
If another code is offered for X20DOF322, compare it against the installed drawings and the manufacturer's variant data. Do not infer interchangeability from enclosure appearance or shared prefix.
Related ordering codes in this family
The following X20DOF322 codes are grouped with X20DOF322 for procurement reference. Each option may change ratings, pinout, software support or approvals; none is automatically a drop-in replacement for X20DOF322.
No further unassigned X20DOF322 code is included with X20DOF322 here.
Receiving and maintenance record
Place the exact X20DOF322 designation on the enquiry and purchase order. Ask for quantity, lead time, included accessories and revision confirmation against the site requirement.
On delivery, inspect X20DOF322 labeling and damage, retain the manufacturer documents, and attach the final site test to the equipment record for X20DOF322.
