XT1B 160 TMD 100-1000 3P F F 1SDA066807R1 technical selection worksheet
Use the complete XT1B 160 TMD 100-1000 3P F F 1SDA066807R1 designation when requesting this three-pole Tmax XT molded-case breaker. The installation must be checked against the actual equipment marking, because a shared product family does not establish identical ratings, options or approvals.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | XT1B 160 TMD 100-1000 3P F F 1SDA066807R1 |
| Product family | XT1B 160 |
| Component role | three-pole Tmax XT molded-case breaker |
| Frame | Tmax XT1B 160 |
| Release | TMD thermal-magnetic |
| Poles | 3 |
| Designation | 100 A thermal / 1000 A magnetic class; verify coordination |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
This table identifies the published family facts for XT1B 160 TMD 100-1000 3P F F 1SDA066807R1. Treat any unlisted option as a selection question, not as an implied specification for XT1B 160 TMD 100-1000 3P F F 1SDA066807R1. Consult the current ABB data and the installed nameplate before release.
What the device does
The work assigned to XT1B 160 TMD 100-1000 3P F F 1SDA066807R1 is specific: Protect and isolate the designated three-phase feeder in the distribution assembly. Record the controlled process, feeder or network point in which XT1B 160 TMD 100-1000 3P F F 1SDA066807R1 operates.
Check the upstream source and the downstream load or signal as a complete path. For XT1B 160 TMD 100-1000 3P F F 1SDA066807R1, an apparently matching connector or housing does not establish functional equivalence.
Installation boundary
Before fitting XT1B 160 TMD 100-1000 3P F F 1SDA066807R1, isolate the process or electrical system under the site procedure and check the drawing, connection, mounting and environmental limits.
Document the original terminals and settings for XT1B 160 TMD 100-1000 3P F F 1SDA066807R1. Reapply only approved wiring and parameter changes; retain the previous unit identification for traceability.
Match the ordered configuration
The most important purchase question for XT1B 160 TMD 100-1000 3P F F 1SDA066807R1 is: Check available fault current, B breaking-class suitability, release settings, terminal style and discrimination. Record any missing suffix, revision, calibration or approval with the supplier.
Ask whether the offered XT1B 160 TMD 100-1000 3P F F 1SDA066807R1 item includes the required terminals, accessories and documentation. Any suggested substitute needs a line-by-line comparison, not an assumption based on the family prefix.
Commissioning evidence
The practical acceptance check for XT1B 160 TMD 100-1000 3P F F 1SDA066807R1 is: Inspect mechanical operation, torque record and protective-test results before energization. Capture actual readings, states or faults rather than reporting only that the device powered up.
Close the work order for XT1B 160 TMD 100-1000 3P F F 1SDA066807R1 with the observed test result, final configuration and responsible reviewer. If a safety or protective function is involved, follow the site-specific validation procedure.
Other codes within this series
The following XT1B 160 designations are grouped on the XT1B 160 TMD 100-1000 3P F F 1SDA066807R1 page to aid searches and enquiries. They may differ in rating, options, protocol or dimensions. Confirm each full designation before substitution.
No other unassigned XT1B 160 designation is included with XT1B 160 TMD 100-1000 3P F F 1SDA066807R1 at this stage.
Enquiry details to send
Quote XT1B 160 TMD 100-1000 3P F F 1SDA066807R1 exactly, then state the installed equipment, required quantity, delivery location and whether a new unit or an approved service spare is needed.
For XT1B 160 TMD 100-1000 3P F F 1SDA066807R1, request the current datasheet, option confirmation and lead time. On receipt, compare the supplied marking to the approved enquiry and retain the commissioning notes with the equipment record.
