Ordering 514825 without losing the PVS58N-021AGR0BN-0013 configuration
Pepperl+Fuchs 514825 identifies the PVS58N-021AGR0BN-0013 singleturn absolute encoder. The main image is a shared Pepperl+Fuchs montage, not a photograph of this exact 514825 item. For an order or maintenance plan, carry both 514825 and the complete type PVS58N-021AGR0BN-0013 to the nameplate and current manufacturer record. The early table separates confirmed reference facts from choices that must be checked on site.
Technical data and selection boundary
| Technical item | Verified value / selection note |
|---|---|
| Exact model | 514825 |
| Product role | singleturn absolute encoder |
| Manufacturer ordering number | 514825 |
| Full designation | PVS58N-021AGR0BN-0013 |
| Family | PVS58 singleturn absolute encoder |
| Interface | PROFIBUS family interface; verify fitted variant |
| Housing | 58 mm class family housing |
| Variant check | Confirm the complete designation and current manufacturer documentation before replacement. |
System role and identity
The purpose of 514825 is to report rotary position over a PROFIBUS-connected control system. Start with the installed system: record the host equipment, supply, mating connection and the environmental or hazardous-area limits. A similar product can fit visually while failing electrically or mechanically. Treat 514825 as an exact order reference, not permission to substitute a nearby catalogue code.
Site verification checklist
- Photograph the printed 514825 marking and any companion PVS58N-021AGR0BN-0013 label before removing equipment.
- Match the 514825 connector or mounting arrangement to the drawing, not to the shared category image.
- Record the as-found circuit state and settings associated with 514825 for later acceptance testing.
- Check certificates, local procedures and the complete 514825 order string when Ex requirements apply.
Fit, handling and approval
Before energizing 514825, Verify complete suffix, shaft and flange dimensions, bus settings and electrical connector before replacement. Inspect cable routing, enclosure condition and the connected equipment. For 514825, reproduce the original configuration only after confirming it is valid for the replacement. If the device is part of an Ex or safety-related installation, have the responsible engineer validate the whole assembly rather than the component name alone.
What the order number does not prove
The printed 514825 reference confirms identity but does not alone establish every installed cable, accessory, firmware or certificate. For 514825, review the complete host bill of materials and the supplier's latest variant documents before releasing an order.
Commissioning evidence
The 514825 commissioning record should capture the installed PVS58N-021AGR0BN-0013 identity, normal operation, changed-state response and any alarms. When applicable, confirm the signal at both ends of the circuit, then repeat after final fixing. A successful 514825 bench check does not replace field approval or hazardous-area inspection.
Procurement record
A purchasing request for 514825 should show the exact code PVS58N-021AGR0BN-0013, quantity, application, host interface and required documents. Ask the supplier to confirm the complete designation and current availability. Retain the verified specification and the installed label with the 514825 maintenance file so a later replacement is not inferred from a stock photograph.
Related-code policy
The source model 514825 is intentionally kept as a standalone search and ordering key here. No unverified look-alike designations are presented as equivalent to 514825. If a different suffix is offered, compare its own published limits and approval documents before acceptance.
