Pepperl+Fuchs CAB-FBM-10-S37S37DI-01101: what the exact variant must match
Pepperl+Fuchs CAB-FBM-10-S37S37DI-01101 is a control-system interconnect cable used for joining a termination board to its controller interface. This product page centers on the precise CAB-FBM-10-S37S37DI-01101 designation and practical fit decisions. Its shared montage is an illustrative category image, not a photograph of the exact variant. Confirm every site-specific electrical, mechanical and approval requirement against the current manufacturer's documentation before a purchase or changeover.
Technical data for the exact designation
| Technical item | Verified value / selection note |
|---|---|
| Exact model | CAB-FBM-10-S37S37DI-01101 |
| Product role | control-system interconnect cable |
| Product class | Fieldbus/control-system interconnect cable |
| Connection family | S37-to-S37 interface indicated by designation |
| Cable identity | Verify pin map and actual length on label |
| Host pairing | Confirm matching board and controller-side socket |
| Variant check | Confirm the complete designation and current manufacturer documentation before replacement. |
Selection note
For CAB-FBM-10-S37S37DI-01101, check connector keying, pin assignment, shield and routing against the cabinet drawing. Record the installed nameplate, matching device, space envelope and existing configuration. An appearance match is only a starting point: signal direction, power, interface and certification must be considered separately.
Do not replace CAB-FBM-10-S37S37DI-01101 by appearance alone; document the connected system and full suffix.
Commissioning evidence
With CAB-FBM-10-S37S37DI-01101 installed, continuity-test every used conductor and verify channel mapping. Compare observed values with a known test condition and record the controller or diagnostic response. Repeat at the relevant operating limits so that an intermittent wiring or setup problem does not go unnoticed.
Buyer handoff
For a CAB-FBM-10-S37S37DI-01101 enquiry, send the complete CAB-FBM-10-S37S37DI-01101 code and connector photographs. Provide the full label, circuit or mounting drawing and operating conditions. Ask for written confirmation before accepting any substituted suffix, especially when a related-looking code has different terminals, approval or function.
Related-looking designations
These names visually resemble CAB-FBM-10-S37S37DI-01101 and are grouped as identification references. They may differ in function, circuit values, mounting, communications and hazardous-area approval. Do not apply the technical values of CAB-FBM-10-S37S37DI-01101 to another complete designation without its own specification.
- CAB-FBM-25-S37S37-DI-01101
Final record
Keep the completed check with the maintenance history for CAB-FBM-10-S37S37DI-01101. If site conditions change, review the current datasheet and repeat the relevant electrical, mechanical and functional checks. The values in this page identify CAB-FBM-10-S37S37DI-01101 where stated; they do not define every visually related code.
