Service brief for the exact CBL-SET-ST 04 designation
Pepperl+Fuchs CBL-SET-ST 04 is a sensor-tester connection cable used to connect a compatible field sensor to the ST 04 tester. This service brief separates the confirmed identity of CBL-SET-ST 04 from the installation choices that must be checked on site. The shared Pepperl+Fuchs main image is an illustrative category montage, not an exact photograph of CBL-SET-ST 04. Use the complete designation on the fitted label when enquiring or replacing the part.
Technical parameters at a glance
| Technical item | Verified value / selection note |
|---|---|
| Exact model | CBL-SET-ST 04 |
| Product role | sensor-tester connection cable |
| Role | Cable set for ST 04 |
| Sheath | PUR, black |
| Protection | IP68/IP69 when properly mated |
| Current | Up to 4 A subject to connector/cable limits |
| Variant check | Confirm the complete designation and current manufacturer documentation before replacement. |
Application snapshot
In operation, CBL-SET-ST 04 is intended to connect a compatible field sensor to the ST 04 tester. Establish the real input condition, the expected output response and the acceptance limit. Where an accessory, receiver, host card, reflector or magnet is required, include that matched part in the bill of materials. Do not infer that the picture or a neighbouring model code establishes compatibility for CBL-SET-ST 04.
Service hold points
Before ordering CBL-SET-ST 04, photograph the nameplate and document what is connected on each side of the device. Check supply, signal or mechanical interface, mounting, environmental exposure and the receiving controller. The table is a compact technical reference for CBL-SET-ST 04; a similar printed string can denote another function, rating or certification. Retain any parameter backup and the current drawing with the maintenance record.
At installation, Check connector keying and pin assignment before applying test power. Confirm power is isolated where required and compare the connector or terminals against the current manufacturer documentation for CBL-SET-ST 04. Verify safe-area and hazardous-area boundaries where applicable; the exact certificate and site wiring govern the final decision. Leave enough clearance for the fitted cable and normal service access.
Acceptance record
Commission CBL-SET-ST 04 with an observable, known condition rather than only checking an indicator lamp. Record at least two input states and their controller responses, then test the edge of the real working range where practical. If CBL-SET-ST 04 is part of a safety or Ex installation, use the site's approved proof-test procedure and exact approval documents. Save settings, photos and measured results so a later replacement can be compared reliably.
Procurement detail
A useful quotation request for CBL-SET-ST 04 includes the full code, quantity, site function, connection type, any mating accessory and required approval. Ask the supplier to confirm every changed suffix on a proposed alternative. This page does not declare that other visually similar codes are interchangeable with CBL-SET-ST 04; each requires its own data and fit review.
Visually related codes
The following model strings resemble CBL-SET-ST 04 in print. They are collected for search and stock recognition only; electrical and mechanical functions can differ. Verify every complete designation independently.
No additional same-pattern designation is grouped with CBL-SET-ST 04 in this selection.
Handover note
Keep the final CBL-SET-ST 04 nameplate photo, fit check and test record with the machine file. Re-check the exact model whenever the host, process or installation environment changes.
