Identify and verify Pepperl+Fuchs PMR.R2.P.10K before replacement
Pepperl+Fuchs PMR.R2.P.10K is a Ex-rated panel potentiometer used to provide an operator-adjustable 10 kOhm setting. This service brief separates the confirmed identity of PMR.R2.P.10K from the installation choices that must be checked on site. The shared Pepperl+Fuchs main image is an illustrative category montage, not an exact photograph of PMR.R2.P.10K. Use the complete designation on the fitted label when enquiring or replacing the part.
Technical parameters at a glance
| Technical item | Verified value / selection note |
|---|---|
| Exact model | PMR.R2.P.10K |
| Product role | Ex-rated panel potentiometer |
| Resistance | 10 kOhm |
| Marking | 0 to 10 scale |
| Protection | IP66 |
| Installation | Verify Zone 1/2/21/22 certificate and panel design |
| Variant check | Confirm the complete designation and current manufacturer documentation before replacement. |
Installation question
At installation, Check hazardous-area approval, panel cutout and gland installation. Confirm power is isolated where required and compare the connector or terminals against the current manufacturer documentation for PMR.R2.P.10K. Verify safe-area and hazardous-area boundaries where applicable; the exact certificate and site wiring govern the final decision. Leave enough clearance for the fitted cable and normal service access.
What must the unit do?
In operation, PMR.R2.P.10K is intended to provide an operator-adjustable 10 kOhm setting. Establish the real input condition, the expected output response and the acceptance limit. Where an accessory, receiver, host card, reflector or magnet is required, include that matched part in the bill of materials. Do not infer that the picture or a neighbouring model code establishes compatibility for PMR.R2.P.10K.
What evidence is retained?
Before ordering PMR.R2.P.10K, photograph the nameplate and document what is connected on each side of the device. Check supply, signal or mechanical interface, mounting, environmental exposure and the receiving controller. The table is a compact technical reference for PMR.R2.P.10K; a similar printed string can denote another function, rating or certification. Retain any parameter backup and the current drawing with the maintenance record.
Commission PMR.R2.P.10K with an observable, known condition rather than only checking an indicator lamp. Record at least two input states and their controller responses, then test the edge of the real working range where practical. If PMR.R2.P.10K is part of a safety or Ex installation, use the site's approved proof-test procedure and exact approval documents. Save settings, photos and measured results so a later replacement can be compared reliably.
What should purchasing quote?
A useful quotation request for PMR.R2.P.10K includes the full code, quantity, site function, connection type, any mating accessory and required approval. Ask the supplier to confirm every changed suffix on a proposed alternative. This page does not declare that other visually similar codes are interchangeable with PMR.R2.P.10K; each requires its own data and fit review.
Visually related codes
The following model strings resemble PMR.R2.P.10K in print. They are collected for search and stock recognition only; electrical and mechanical functions can differ. Verify every complete designation independently.
No additional same-pattern designation is grouped with PMR.R2.P.10K in this selection.
Handover note
Keep the final PMR.R2.P.10K nameplate photo, fit check and test record with the machine file. Re-check the exact model whenever the host, process or installation environment changes.
