How to confirm PVM58I-011AGR0BN-1213 before it enters a live installation
Pepperl+Fuchs PVM58I-011AGR0BN-1213 is a multiturn absolute rotary encoder used for returning absolute shaft position to an industrial controller. This product page centers on the precise PVM58I-011AGR0BN-1213 designation and practical fit decisions. Its shared montage is an illustrative category image, not a photograph of the exact variant. Confirm every site-specific electrical, mechanical and approval requirement against the current manufacturer's documentation before a purchase or changeover.
Technical data for the exact designation
| Technical item | Verified value / selection note |
|---|---|
| Exact model | PVM58I-011AGR0BN-1213 |
| Product role | multiturn absolute rotary encoder |
| Family | PVM58 multiturn absolute encoder |
| Housing | 58 mm-class industrial encoder |
| Network | PROFIBUS-type PVM58I interface; confirm exact unit |
| Mechanical/electrical options | Read shaft, flange, connection and address from installed unit |
| Variant check | Confirm the complete designation and current manufacturer documentation before replacement. |
Service brief
Use PVM58I-011AGR0BN-1213 for returning absolute shaft position to an industrial controller. A service technician should identify the upstream and downstream interfaces before disturbing the connection.
Before the change
For PVM58I-011AGR0BN-1213, check the shaft coupling, flange, bus address, termination and encoder scaling. Record the installed nameplate, matching device, space envelope and existing configuration. An appearance match is only a starting point: signal direction, power, interface and certification must be considered separately.
After the change
With PVM58I-011AGR0BN-1213 installed, compare position at reference angles and after a power cycle. Compare observed values with a known test condition and record the controller or diagnostic response. Repeat at the relevant operating limits so that an intermittent wiring or setup problem does not go unnoticed.
Supply-chain check
For a PVM58I-011AGR0BN-1213 enquiry, include the complete PVM58I code and saved configuration in the RFQ. Provide the full label, circuit or mounting drawing and operating conditions. Ask for written confirmation before accepting any substituted suffix, especially when a related-looking code has different terminals, approval or function.
Related-looking designations
These names visually resemble PVM58I-011AGR0BN-1213 and are grouped as identification references. They may differ in function, circuit values, mounting, communications and hazardous-area approval. Do not apply the technical values of PVM58I-011AGR0BN-1213 to another complete designation without its own specification.
- PVM 58A-011-AG-R0BN-14-16
- PVM58N-011AGR0BN-1213
- PVM58N-011AGROBN-1213
- PVS58N-011AGR0BN-0013
- PVS58N-011AGROBN-0013
- PVS58N-032AGR0BN-0013
Final record
Keep the completed check with the maintenance history for PVM58I-011AGR0BN-1213. If site conditions change, review the current datasheet and repeat the relevant electrical, mechanical and functional checks. The values in this page identify PVM58I-011AGR0BN-1213 where stated; they do not define every visually related code.
