Pepperl+Fuchs TB-C3-AIO16-KS-Y243011: what the exact variant must match
Pepperl+Fuchs TB-C3-AIO16-KS-Y243011 is a control-system termination board used for bringing field analog wiring to a matched control-system interface. This product page centers on the precise TB-C3-AIO16-KS-Y243011 designation and practical fit decisions. Its shared montage is an illustrative category image, not a photograph of the exact variant. Confirm every site-specific electrical, mechanical and approval requirement against the current manufacturer's documentation before a purchase or changeover.
Technical data for the exact designation
| Technical item | Verified value / selection note |
|---|---|
| Exact model | TB-C3-AIO16-KS-Y243011 |
| Product role | control-system termination board |
| Base family | TB-C3-AIO16-KS termination-board design |
| Signal grouping | 16 analog I/O channel positions in the base drawing |
| Host fit | Verify the Centum C3 controller/card mapping |
| Suffix | Y243011 configuration requires exact-board confirmation |
| Variant check | Confirm the complete designation and current manufacturer documentation before replacement. |
Buyer questions
What must TB-C3-AIO16-KS-Y243011 connect to?
For TB-C3-AIO16-KS-Y243011, check the installed card, board pinout, host cables and the Y243011-specific label. Record the installed nameplate, matching device, space envelope and existing configuration. An appearance match is only a starting point: signal direction, power, interface and certification must be considered separately.
How can TB-C3-AIO16-KS-Y243011 be accepted on site?
With TB-C3-AIO16-KS-Y243011 installed, trace field-to-host terminals on representative and spare channels. Compare observed values with a known test condition and record the controller or diagnostic response. Repeat at the relevant operating limits so that an intermittent wiring or setup problem does not go unnoticed.
What belongs in the TB-C3-AIO16-KS-Y243011 order?
For a TB-C3-AIO16-KS-Y243011 enquiry, request the complete board designation and a photograph of both connectors. Provide the full label, circuit or mounting drawing and operating conditions. Ask for written confirmation before accepting any substituted suffix, especially when a related-looking code has different terminals, approval or function.
Related-looking designations
These names visually resemble TB-C3-AIO16-KS-Y243011 and are grouped as identification references. They may differ in function, circuit values, mounting, communications and hazardous-area approval. Do not apply the technical values of TB-C3-AIO16-KS-Y243011 to another complete designation without its own specification.
- TB-RS-D016-AKB-199439
- TB-RS-DI16-AKB-185847
- TB-RS-DO16-AKB-204061
Final record
Keep the completed check with the maintenance history for TB-C3-AIO16-KS-Y243011. If site conditions change, review the current datasheet and repeat the relevant electrical, mechanical and functional checks. The values in this page identify TB-C3-AIO16-KS-Y243011 where stated; they do not define every visually related code.
