Practical specification review for Pepperl+Fuchs V1-G-5M-PUR-ABG-V1-W in a live plant
Pepperl+Fuchs V1-G-5M-PUR-ABG-V1-W is a shielded sensor connection cable used for connecting a field sensor while preserving a shielded cable route. This page identifies the representative designation and the checks that matter when the device is selected for a real installation. The common product montage is a category reference image, not a photograph of the exact V1-G-5M-PUR-ABG-V1-W unit. Compare the full label and current manufacturer data before committing a purchase or changing a live circuit.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Exact designation | V1-G-5M-PUR-ABG-V1-W |
| Product type | shielded sensor connection cable |
| Cable length | 5 m |
| Jacket | PUR |
| Connection | M12 sensor/actuator connection; verify both end orientations |
| Construction | Shielded connection cable |
| Variant boundary | Use the complete type code and current device label when selecting a replacement. |
Buyer note — V1-G-5M-PUR-ABG-V1-W: retain the complete ordering suffix and confirm connected equipment.
Procurement and replacement details
When requesting V1-G-5M-PUR-ABG-V1-W, State the required length, bend radius and mechanical exposure; a visually similar V1 cable can have a different end or wiring. State operating environment, required certificates and the exact application. Request written confirmation for any proposed alternative. A reference model in the list below may belong to the same visible naming cluster but is not a default functional replacement for V1-G-5M-PUR-ABG-V1-W.
Operating role and application
In the intended system, V1-G-5M-PUR-ABG-V1-W is used for connecting a field sensor while preserving a shielded cable route. Its role is not defined by the product picture or a shared prefix alone. Establish what arrives at the device, what leaves it and which controller, field instrument or mechanical component it must match. When V1-G-5M-PUR-ABG-V1-W is ordered as a spare, preserve the complete suffix and all installed configuration information.
Interface and installation fit
For V1-G-5M-PUR-ABG-V1-W, Match the V1 mating faces, pin count, straight/right-angle ends and shield termination to the actual installation. Review the mating equipment, supply path, mounting space, cable or terminal assignment and any required hazardous-area documentation. If the present installation has field-modified wiring or programming, photograph and record it before removal. The same-looking item can require different wiring or settings.
Commissioning and maintenance
After fitting V1-G-5M-PUR-ABG-V1-W, Check continuity, pin-to-pin assignment, insulation and connector sealing after the cable is routed. Record both the expected and observed behavior. Inspect indicators, fault response and controller diagnostics where provided. If the test does not match, verify wiring, configuration and connected equipment before assuming that a new V1-G-5M-PUR-ABG-V1-W is defective.
Related designation references
The following catalog designations share the visible V1 naming cluster with V1-G-5M-PUR-ABG-V1-W. They are grouped to aid search and procurement, not to assert identical ratings, wiring, approvals or interchangeability. Each complete code must be checked separately against the required duty.
- V1-G-5M-PUR-ABG
- V1SD-G-5M-PUR-ABG-V45-G
- V1-8/16A-E2
- V1-G -5M-PUR
- V1-G-10m-PUR
- V1-G-10M-PUR-ABG
- V1-G-2M-PUR
- V1-G-2M-PVC
- V1-G-5M-PUR-ABG 200762
- V1-G-5M-PUR-ABG-V1-W 127065
- V1-G-5M-PVC
- V1-G-5M-PVC-V1-G
- V1-G-BK10M-PUR-R1
- V1-G-BK3M-PUR-U
- V1-G-BK5M-PUR-U
- V1-G-N-10M-PUR
- V1-G-N-15M-PURE
- V1-G-N-2M-PUR
- V1-G-PG9
- V1-M20-80
- V1-W-15M-PUR
- V1-W-1M-PUR
- V1-W-2M-PUR
- V1-W-2M-PVC
- V1-W-3M-PUR
- V1-W-5M-PVC
- V1-W-A2-2M-PUR
- V1-W-A2-5M-PUR-V1-G
- V1-W-ABG-PG9
- V1-W-BK
- V1-W-BK10M-PUR-U
- V1-W-BK2M-PUR-U
- V1-W-BK5M-PUR-U
- V1-W-E2-YE5M-PVC
- V1-W-N-25M-PUR
- V1-W-N-2M-PUR
- V1-W-N-40M-PUR
- V1-W-N4-BU5M-PUR-N1
- V1-W-OR10M-POC
- V1-W-OR10M-PUR-A
- V1-WN-10M-PUR
- V112-G-BK10M-PUR
- V12-G-YE2M- PVC
- V15-G-2M-PUR
- V15-G-2M-PVC
- V15-G-2M-PVC L=2М
- V15-G-PG9
- V15-W-10M-PUR
- V15-W-2M-PUR
- V15-W-5M-PUR
- V15L-G-10M-PUR-U
- V15S-G
- V19-G-ABG-PG9
- V19-G-BK2M-PUR-U
- V1S-G-ABG-PG9
- V1SD-G-5M-PUR-ABG-V45-G 213292
- V1SD-G-ABG-PG9
- V1SD-G-GN10M-PUR-E1S-V45-G
- V1SD-G-GN3M-PUR-E1S-V45-G
Final selection check
For V1-G-5M-PUR-ABG-V1-W, confirm the latest datasheet and nameplate before ordering or commissioning. Retain the loop drawing, configuration and acceptance record with the maintenance file. The technical values above apply to V1-G-5M-PUR-ABG-V1-W only where stated, not to every related designation.
Additional visually similar Pepperl+Fuchs model designations
These complete codes are collected for model search and identification because their printed designations look similar. They may represent different products, electrical interfaces, mechanical sizes or approvals. They are not declared interchangeable with V1-G-5M-PUR-ABG-V1-W. Verify each complete designation against the manufacturer record and the installed equipment before ordering.
- V3-GM
- V31-GM-2M-PUR
- V93-W-YE2M-ST00W-W6
Further Pepperl+Fuchs look-alike model references
These are additional printed model strings grouped for product search only. A similar-looking code can describe another device, connection, rating or certification. It is not automatically a substitute for V1-G-5M-PUR-ABG-V1-W. Check the full manufacturer designation and the installed system independently.
- NAMUR V1-W-N-2M-PUR
