Identifying WCS-PG210 in the field and confirming its signal path
Pepperl+Fuchs WCS-PG210 is a WCS positioning interface module for transferring WCS read-head position to a PROFIBUS controller. The shared product montage is a category reference image rather than a photo of this exact WCS-PG210 variant. The table places the verified identity and useful selection data at the front; the notes below explain where a maintenance or purchasing team should confirm the installed circuit.
Technical parameters and fit
| Technical item | Verified value / selection note |
|---|---|
| Exact model | WCS-PG210 |
| Product role | WCS positioning interface module |
| Control network | PROFIBUS DP, up to 12 Mbit/s |
| Reader link | RS-485, 62.5 kbit/s |
| Reader capacity | Up to 4 WCS read heads |
| Supply | 24 V DC ±20% |
| Variant check | Confirm the complete designation and current manufacturer documentation before replacement. |
On-site proof
After WCS-PG210 is connected, Read a known position from each connected head and verify bus diagnostics at the PLC. Record the input condition and the controller's observed response at both ends of the useful operating range. Also check supply, diagnostics and any line-fault indication. A successful power-on indication alone does not prove that WCS-PG210 has the correct configuration.
Application path
In this installation, WCS-PG210 supports transferring WCS read-head position to a PROFIBUS controller. Start at the field device or mechanical target, follow the signal through the connection and identify what the host expects. A catalog family resemblance cannot establish output polarity, scaling, hazardous-area approval or interchangeability. The complete WCS-PG210 code is the procurement reference, while the as-installed drawing is the acceptance reference.
Installation interface
Before fitting WCS-PG210, Check reader type, station addresses, bus termination and the GSD/PLC configuration. Inspect available cabinet or machine space, cable exit, terminals, environmental limits and nearby equipment. If an old unit has user settings, document them before removal. Confirm the latest nameplate and electrical drawing because WCS-PG210 variants can share an enclosure while differing in function.
Replacement decision
When purchasing WCS-PG210, Ask for the complete PG210 version and a record of existing address and bus settings. Share the full model, site photos and required certificates with the supplier. Any proposed alternative should be checked against the exact connected equipment and signed off before it replaces WCS-PG210; a similar-looking code is a search reference, not a declared equivalent.
Other visually related ordering codes
The following designations resemble the WCS-PG210 naming pattern and are collected here to help buyers locate variants. Their functions, electrical ratings, connections and approvals may differ. The exact WCS-PG210 technical values above must not be copied onto another suffix without checking its own datasheet.
- WCS-MF1WCS-MF1
- WCS-PG210E
- WCS-PNG210
- WCS2-FT1
- WCS2-GT09-WD-P1
- WCS2-MC
- WCS2-MH
- WCS2-PS1
- WCS2B-LS221
- WCS3B-LS221
- WCS3B-LS246
Handover note
Keep the drawing, configured settings, inspection result and purchasing record with WCS-PG210. Recheck the current manufacturer datasheet if the duty, mounting, network or approval changes. This closes the WCS-PG210 selection and commissioning review without treating related codes as interchangeable.
Ordering-number and related-reference check
These verified Pepperl+Fuchs references help locate purchasing records. Some identify a different product or accessory, not a replacement for the main model. Confirm the complete type, ratings and approval before ordering.
- 199290-0017 — ordering reference for distinct WCS3B-LS246 read head.
