Schneider soft starter-ATS22-control 220V-power 230V(55kW)/400...440V(110kW)
Schneider soft starter-ATS22-control 220V-power 230V(55kW)/400...440V(110kW) ATS22C21Q
ATS22C21Q product specification as below.
-
Characteristics
Mainrange of product Altistart 22product or component type Soft starterproduct destination Asynchronous motorsproduct specific application Pumps and fanscomponent name ATS22network number of phases 3 phases[Us] rated supply voltage 230...440 V - 15...10 %motor power kW 110 kW 400 V
110 kW 440 V
55 kW 230 Vfactory setting current 195 Apower dissipation in W 117 W for standard applicationsutilisation category AC-53Atype of start Start with torque control (current limited to 3.5 In)IcL starter rating 210 A connection in the motor supply line for standard applicationsIP degree of protection IP00assembly style With heat sinkfunction available Internal bypasssupply voltage limits 195...484 Vsupply frequency 50...60 Hz - 10...10 %network frequency 45...66 Hzdevice connection In the motor supply line
To the motor delta terminals[Uc] control circuit voltage 230 V -15...10 % 50/60 Hzcontrol circuit consumption 20 Wdiscrete output number 2discrete output type Relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
Relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/Ominimum switching current 100 mA 12 V DC relay outputsmaximum switching current 5 A 250 V AC resistive 1 relay outputs
5 A 30 V DC resistive 1 relay outputs
2 A 250 V AC inductive 0.4 20 ms relay outputs
2 A 30 V DC inductive 7 ms relay outputsdiscrete input number 3discrete input type Logic LI1, LI2, LI3 5 mA 4.3 kOhmdiscrete input voltage 24 V <= 30 Vdiscrete input logic Positive logic LI1, LI2, LI3 < 5 V and <= 2 mA > 11 V >= 5 mAoutput current 0.4...1 Icl adjustablePTC probe input 750 Ohmcommunication port protocol Modbusconnector type 1 RJ45communication data link Serialphysical interface RS485 multidroptransmission rate 4800, 9600 or 19200 bpsinstalled device 31protection type Phase failure line
Thermal protection starter
Thermal protection motormarking CEtype of cooling Forced convectionoperating position Vertical +/- 10 degreeheight 425 mmwidth 206 mmdepth 299 mmproduct weight 33 kgpower range 55...100 kW at 200...240 V 3 phases
110...220 kW at 380...440 V 3 phasesmotor starter type Soft starterelectromagnetic compatibility Conducted and radiated emissions level A IEC 60947-4-2
Damped oscillating waves level 3 IEC 61000-4-12
Electrostatic discharge level 3 IEC 61000-4-2
Immunity to electrical transients level 4 IEC 61000-4-4
Immunity to radiated radio-electrical interference level 3 IEC 61000-4-3
Voltage/current impulse level 3 IEC 61000-4-5standards EN/IEC 60947-4-2product certifications C-Tick
CSA
CCC
GOST
ULvibration resistance 1.5 mm 2...13 Hz EN/IEC 60068-2-6
1 gn 13...200 Hz EN/IEC 60068-2-6shock resistance 15 gn 11 ms EN/IEC 60068-2-27noise level 56 dBpollution degree Level 2 IEC 60664-1relative humidity 0...95 % without condensation or dripping water EN/IEC 60068-2-3ambient air temperature for operation -10...40 °C without derating
> 40...< 60 °C with current derating 2.2 % per °Cambient air temperature for storage -25...70 °Coperating altitude <= 1000 m without derating
> 1000...< 2000 m with current derating of 2.2 % per additional 100 mSustainable offer status Green Premium productRoHS (date code: YYWW) Compliant - since 0939 - Schneider Electric declaration of conformity Schneider Electric declaration of conformityREACh Product environmental profile AvailableProduct environmentalProduct end of life instructions AvailableProduct environmentalWarranty period 18 months - Other selection models for Schneider Altistart 22 for your reference.
-
ATS22C21Q
ATS22C25Q
ATS22C48Q
ATS22D62Q
ATS22C17Q
ATS22D17Q
ATS22D32Q
ATS22D88Q
ATS22C14Q
ATS22C32Q
ATS22C41Q
ATS22C59Q
ATS22D47Q
ATS22D75Q
ATS22C11Q
For more details about Schneider Altistart22,please feel free to contact me, thanks.
Contact details