low voltage

Hotline

Danfoss 060L110266 KP61 | −30 to +13 °C KP61 Thermostat, SPDT Contact and Sensor Fit

description:Danfoss 060L110266 KP61 KP61 capillary thermostat: verified technical data, selection checks and similar-looking order references....
BASIC INFO

Danfoss 060L110266 KP61: refrigeration temperature-switch review

Danfoss 060L110266 KP61 identifies a KP61 capillary thermostat. The technical data below follows the cited manufacturer record for this exact code. The shared main image is a category reference and not a photograph of the exact Danfoss 060L110266 KP61 item.

Key technical data

Technical itemVerified value / selection note
Complete order number060L110266 KP61
Manufacturer / item classDanfoss KP61 capillary thermostat
Danfoss article060L110266
Regulation range−30 to +13 °C
Reset / contactAutomatic reset / SPDT
Sensor / enclosureRemote air coil, 2 m capillary / IP30
Image scopeShared Danfoss category collage, not exact-item photograph
Final selection ruleVerify complete printed code, interface and application before substitution

Control setting

For Danfoss 060L110266 KP61, match the existing setpoint and differential before replacement.

Sensor routing

For Danfoss 060L110266 KP61, protect the capillary tube and confirm bulb location and thermal response.

Proof test

For Danfoss 060L110266 KP61, observe switching temperature and controller response during a controlled test.

Similar-looking Danfoss order references

These order strings resemble Danfoss 060L110266 KP61 visually and are listed for enquiry searches only. They can have different functions, ratings or connections. They are not automatic alternatives to Danfoss 060L110266 KP61; verify each complete code independently.

060L-310466
060L124966
060L310666
060L3113

Ordering and receiving review

Request a quotation against the full Danfoss 060L110266 KP61 code and the installed equipment record. Check manufacturer status, pack quantity and all relevant electrical or process interfaces. An offer based only on a similar-looking model number requires a separate technical comparison.

When Danfoss 060L110266 KP61 arrives, inspect the label and supplied connections before installation. Record the installed setting, configuration or functional test result so future service enquiries retain the exact Danfoss 060L110266 KP61 identity.

 

 

Pre:Danfoss 134B1726 | MKII Safe-Stop Control Card and Software Compatibility Check Next:Danfoss 180B0037 | PAH 32 Pump Code, Pressure Duty and Motor Sizing Review