low voltage

Hotline

Danfoss 134B1726 | MKII Safe-Stop Control Card and Software Compatibility Check

description:Danfoss 134B1726 FC 302 control-card spare part: verified technical data, selection checks and similar-looking order references....
BASIC INFO

Danfoss 134B1726: control-card replacement scope

Danfoss 134B1726 identifies a FC 302 control-card spare part. The technical data below follows the cited manufacturer record for this exact code. The shared main image is a category reference and not a photograph of the exact Danfoss 134B1726 item.

Key technical data

Technical itemVerified value / selection note
Complete order number134B1726
Manufacturer / item classDanfoss FC 302 control-card spare part
Manufacturer itemControl Card MKII with safe stop
Listed useFC-302 / FC312 in Danfoss parts list
Code number134B1726
Compatibility boundaryVerify drive software and exact board generation
Image scopeShared Danfoss category collage, not exact-item photograph
Final selection ruleVerify complete printed code, interface and application before substitution

Card generation

For Danfoss 134B1726, compare MKII versus existing MKI board and installed software before substitution.

Safety wiring

For Danfoss 134B1726, record safe-stop connections and perform an approved functional safety test.

Configuration

For Danfoss 134B1726, back up settings, then validate I/O, communication and motor control after service.

Similar-looking Danfoss order references

These order strings resemble Danfoss 134B1726 visually and are listed for enquiry searches only. They can have different functions, ratings or connections. They are not automatic alternatives to Danfoss 134B1726; verify each complete code independently.

134B0035
134B0036
134B1732
134B6862
134B6864
134B6866
134B7150
134B7202
134B7249

Ordering and receiving review

Request a quotation against the full Danfoss 134B1726 code and the installed equipment record. Check manufacturer status, pack quantity and all relevant electrical or process interfaces. An offer based only on a similar-looking model number requires a separate technical comparison.

When Danfoss 134B1726 arrives, inspect the label and supplied connections before installation. Record the installed setting, configuration or functional test result so future service enquiries retain the exact Danfoss 134B1726 identity.

 

 

Pre:Danfoss 176F3166 | D3h/D4h Top Fan Kit, IP20 Fit and Safe Service Notes Next:Danfoss 060L110266 KP61 | −30 to +13 °C KP61 Thermostat, SPDT Contact and Sensor Fit