Hirschmann LED-equipped valve connector for actuator wiring: GML-K 2000 LED 24 GB1 ZZ(933263-111)
Hirschmann GML-K 2000 LED 24 GB1 ZZ(933263-111) is a LED valve connector associated with the GML-K valve connector range. This page uses the full designation as the purchasing keyword. The shared Hirschmann collage is a category reference image, not an exact photograph of the configured GML-K 2000 LED 24 GB1 ZZ(933263-111) unit.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | GML-K 2000 LED 24 GB1 ZZ(933263-111) |
| Family | GML-K valve connector |
| Product form | LED valve connector |
| Order reference | 933263111 appears in complete designation; verify label |
| Indicator | LED function indicated in type name |
| Nominal marking | 24 in type name; verify exact supply and polarity |
| Mating part | Confirm valve-coil interface and pin geometry |
| Seal | Check compatible gasket and cable entry |
| Selection rule | Verify complete printed code and manufacturer record for the installed version |
Ordering and configuration checklist
When requesting GML-K 2000 LED 24 GB1 ZZ(933263-111), quote the full designation exactly as printed and explain the equipment role. Ask for confirmation of condition, revision, supplied accessories and the manufacturer's documented specification. If a different code is offered, compare every changed position of the designation and obtain written acceptance from the site engineer.
For GML-K 2000 LED 24 GB1 ZZ(933263-111), check electrical supply, connector geometry, mounting envelope, environmental limits and compatibility with any host platform. Do not transfer a family-level value to a particular suffix without checking the manufacturer record. Where a placeholder occurs in the listed code, the installed version must be read from the actual nameplate.
Receiving inspection
On receipt of GML-K 2000 LED 24 GB1 ZZ(933263-111), compare the package, printed type and order documentation. Inspect connectors, terminals and mechanical condition. Set aside any item whose identity or included parts differ from the approved order until the discrepancy is resolved.
Application and interface context
For GML-K 2000 LED 24 GB1 ZZ(933263-111), begin with the equipment already in service. Compare the fitted solenoid interface, indicator orientation and cable exit before selecting a replacement. Note the device location, connected equipment and actual operating conditions. The complete code must be compared with the physical label before deciding whether GML-K 2000 LED 24 GB1 ZZ(933263-111) matches the application.
A supplier offer for GML-K 2000 LED 24 GB1 ZZ(933263-111) should identify the manufacturer type, item number if available, accessories and any included subassemblies. A similar appearance can hide a different cable entry, port population, output rating, software level or host requirement. Record these differences explicitly rather than assuming interchangeability.
Interface record
Keep a photograph of GML-K 2000 LED 24 GB1 ZZ(933263-111) and its mating or adjacent hardware with the service request. List the active ports, contacts, modules or terminals, as appropriate, and note their exact cable or fiber terminations. This baseline supports a meaningful receiving inspection and helps prevent an incomplete delivery.
Installation and acceptance
Before changing GML-K 2000 LED 24 GB1 ZZ(933263-111), capture the pre-change wiring or network state and follow the site's authorized isolation procedure. Test the LED and coil circuit with the site's approved wiring diagram; a visual match alone is insufficient. Use the manufacturer's installation instructions and retain the original unit until the replacement has passed a controlled test.
After installing GML-K 2000 LED 24 GB1 ZZ(933263-111), verify power or continuity, relevant link and alarm indicators, and the actual application behavior. Save the test result, serial number, software revision if relevant and final configuration alongside the maintenance record. A device that powers up but does not restore the intended function should not be treated as an accepted substitute.
Service handover
The handover for GML-K 2000 LED 24 GB1 ZZ(933263-111) should include the final manufacturer code, as-fitted connections, any configuration backup and the reason for any approved deviation. This keeps future replacement enquiries tied to the real installation rather than a shortened family name.
Similar-looking model references
The following designations resemble GML-K 2000 LED 24 GB1 ZZ(933263-111) and are listed here for search and enquiry convenience. Their functions and ratings may differ; each full code requires its own fit check.
Final buyer check
Before committing to GML-K 2000 LED 24 GB1 ZZ(933263-111), resolve any mismatch in the full label, quotation, installed interfaces or included accessories. Confirm lead time, condition and return terms in writing. The correct complete designation matters more than a visually similar family photograph.
