Hirschmann GSP 311 connector for industrial valve coils: GSP 311 PG11(931297-001)
Hirschmann GSP 311 PG11(931297-001) is a DIN Form A valve connector associated with the GSP 311 valve connector range. This page uses the full designation as the purchasing keyword. The shared Hirschmann collage is a category reference image, not an exact photograph of the configured GSP 311 PG11(931297-001) unit.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | GSP 311 PG11(931297-001) |
| Family | GSP 311 valve connector |
| Product form | DIN Form A valve connector |
| Connector form | DIN Form A valve connector |
| Contacts | 3 plus protective earth in manufacturer family data |
| Cable entry | PG11 version indicated by full designation |
| Electrical rating | Up to 400 V and 16 A in GSP 311 manufacturer data |
| Order reference | 931297001 in supplied designation; confirm actual label |
| Selection rule | Verify complete printed code and manufacturer record for the installed version |
Application and interface context
For GSP 311 PG11(931297-001), begin with the equipment already in service. Check the solenoid pin spacing, earth contact and PG11 gland against the installed assembly. Note the device location, connected equipment and actual operating conditions. The complete code must be compared with the physical label before deciding whether GSP 311 PG11(931297-001) matches the application.
A supplier offer for GSP 311 PG11(931297-001) should identify the manufacturer type, item number if available, accessories and any included subassemblies. A similar appearance can hide a different cable entry, port population, output rating, software level or host requirement. Record these differences explicitly rather than assuming interchangeability.
Interface record
Keep a photograph of GSP 311 PG11(931297-001) and its mating or adjacent hardware with the service request. List the active ports, contacts, modules or terminals, as appropriate, and note their exact cable or fiber terminations. This baseline supports a meaningful receiving inspection and helps prevent an incomplete delivery.
Installation and acceptance
Before changing GSP 311 PG11(931297-001), capture the pre-change wiring or network state and follow the site's authorized isolation procedure. Verify seal compression, cable diameter and supply conditions before re-energizing the valve. Use the manufacturer's installation instructions and retain the original unit until the replacement has passed a controlled test.
After installing GSP 311 PG11(931297-001), verify power or continuity, relevant link and alarm indicators, and the actual application behavior. Save the test result, serial number, software revision if relevant and final configuration alongside the maintenance record. A device that powers up but does not restore the intended function should not be treated as an accepted substitute.
Service handover
The handover for GSP 311 PG11(931297-001) should include the final manufacturer code, as-fitted connections, any configuration backup and the reason for any approved deviation. This keeps future replacement enquiries tied to the real installation rather than a shortened family name.
Ordering and configuration checklist
When requesting GSP 311 PG11(931297-001), quote the full designation exactly as printed and explain the equipment role. Ask for confirmation of condition, revision, supplied accessories and the manufacturer's documented specification. If a different code is offered, compare every changed position of the designation and obtain written acceptance from the site engineer.
For GSP 311 PG11(931297-001), check electrical supply, connector geometry, mounting envelope, environmental limits and compatibility with any host platform. Do not transfer a family-level value to a particular suffix without checking the manufacturer record. Where a placeholder occurs in the listed code, the installed version must be read from the actual nameplate.
Receiving inspection
On receipt of GSP 311 PG11(931297-001), compare the package, printed type and order documentation. Inspect connectors, terminals and mechanical condition. Set aside any item whose identity or included parts differ from the approved order until the discrepancy is resolved.
Similar-looking model references
The following designations resemble GSP 311 PG11(931297-001) and are listed here for search and enquiry convenience. Their functions and ratings may differ; each full code requires its own fit check.
Final buyer check
Before committing to GSP 311 PG11(931297-001), resolve any mismatch in the full label, quotation, installed interfaces or included accessories. Confirm lead time, condition and return terms in writing. The correct complete designation matters more than a visually similar family photograph.
