low voltage

Hotline

P2722HE 27-inch USB-C Hub Monitor | Full HD Display with 65W Power Delivery and RJ45

description:Dell P2722HE is a 27-inch Full HD IPS monitor with a USB-C hub, up to 65 W power delivery and RJ45 connectivity. Check host USB-C video and charging support, cable requirements and firmware before deployment....
BASIC INFO

One-cable desk deployment with P2722HE

P2722HE combines a 27-inch Full HD screen with a USB-C hub intended to simplify a compatible workstation connection. When the host supports DisplayPort Alt Mode and the required charging profile, a USB-C cable can carry video, data and power. Validate the laptop's USB-C capabilities before treating P2722HE as a one-cable dock.

 

Display, hub and network specification

Selection pointSpecification / confirmation
Exact modelP2722HE
Display27-inch IPS panel; 1920 x 1080 at 60 Hz
USB-C upstreamDisplayPort Alt Mode and Power Delivery up to 65 W
VideoHDMI 1.4, DisplayPort 1.2 and DisplayPort MST output
HubFour USB 3.2 Gen 1 downstream ports and RJ45 network port
ErgonomicsHeight, tilt, swivel and pivot adjustment; 100 x 100 mm VESA
Host checkConfirm USB-C video, charging budget, network policy and included cables

 

Connect the host and desk equipment

For P2722HE, connect the USB-C upstream path to a host port that supports video output and sufficient Power Delivery. Use the monitor's RJ45 connection only after confirming the corporate network policy and driver support; confirm the supplied USB-C cable can meet the planned data and charging needs. DisplayPort MST output may support a daisy-chain layout under compatible host and display conditions.

 

  • Set the host display mode to the supported 1920 x 1080 at 60 Hz.
  • Verify USB-C charging and Ethernet link independently.
  • Check MST settings and cable topology before adding a second screen.
  • Adjust stand height, pivot and viewing angle at handover.

 

Desk handover checklist for P2722HE

Document the host model, USB-C port used, monitor input, Ethernet assignment and any downstream USB devices attached to P2722HE. If charging is not supported by the host port, provide a separate power arrangement. Test video, network and USB peripherals together before the desk is released.

 

Keep P2722HE and its selected host-cable arrangement in the workstation deployment record. Record P2722HE's firmware, cable choice and host support for future servicing. Verify that P2722HE is listed in the workstation asset inventory.

 

 

Pre:370-BBRN 64GB DDR5 RDIMM | Dell 5600 MT/s ECC Server Memory Compatibility Guide Next:Dell PowerEdge R350 1U Rack Server | E-2300 Compute, DDR4 Memory and Storage Planning