ABB 1SDA057004R1, E6H5000PR122/P-LSI field-matching guide
ABB 1SDA057004R1, E6H5000PR122/P-LSI is treated here as the exact field reference within classic Emax E6H air circuit breakers. This dossier is organized around interface evidence: what the installed item touches, which ratings must match, and how the result is accepted. The full designation matters; shared appearance is not proof of interchangeability.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 1SDA057004R1, E6H5000PR122/P-LSI |
| Product family | classic Emax E6H air circuit breakers |
| Component role | E6H 5000 A PR122/P-LSI breaker |
| Exact ABB order reference | 1SDA057004R1 |
| ABB product series | classic Emax E6H air circuit breakers |
| ABB series | Classic Emax E6H |
| Rated current | 5000 A |
| Release | PR122/P-LSI |
| Boundary | Classic E6H differs from Emax 2 E6.2 |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
For ABB 1SDA057004R1, E6H5000PR122/P-LSI, read the values above together with the physical nameplate and the latest manufacturer instructions. A family description does not establish every optional feature of a particular shipped unit.
Outgoing interface
Follow the path leaving ABB 1SDA057004R1, E6H5000PR122/P-LSI to the load, controller or next panel device. Compare terminal assignment, conductor preparation, feedback and accessible clearances.
Changes downstream of ABB 1SDA057004R1, E6H5000PR122/P-LSI can invalidate an otherwise plausible substitution. Resolve the complete connected function with the responsible engineer.
Incoming interface
Trace the incoming electrical, mechanical or signal interface to ABB 1SDA057004R1, E6H5000PR122/P-LSI. Record supply characteristics, installation position, termination and any required upstream isolation.
A purchase for ABB 1SDA057004R1, E6H5000PR122/P-LSI should state those incoming conditions explicitly; a matching body size does not prove the input interface is correct.
Application and functional boundary
ABB 1SDA057004R1, E6H5000PR122/P-LSI is intended to protect a high-current low-voltage circuit. Identify the circuit, cabinet or process duty in the as-built drawing before selecting a replacement.
The functional boundary of ABB 1SDA057004R1, E6H5000PR122/P-LSI includes connected devices and control logic. Note which neighboring components rely on its state, output or protective function.
Designation and option review
For ABB 1SDA057004R1, E6H5000PR122/P-LSI, compare drawout cradle, release, poles, fault duty and accessories. Review every suffix and mechanical option on both the old label and proposed replacement.
If a supplier proposes a variation of ABB 1SDA057004R1, E6H5000PR122/P-LSI, request a written difference list covering electrical ratings, physical fit, approvals and service impact.
Commissioning evidence
After installing ABB 1SDA057004R1, E6H5000PR122/P-LSI, test trip settings and racking interlocks. Include the connected system in the acceptance test rather than checking only the loose component.
Record the ABB 1SDA057004R1, E6H5000PR122/P-LSI as-left settings, measurements, test method and reviewer. Do not release equipment when unresolved alarms or interface mismatches remain.
Engineering hold points
Place ABB 1SDA057004R1, E6H5000PR122/P-LSI on hold if its label, order confirmation or dimensions disagree with the approved drawing. Capture photographs and the exact discrepancy before releasing stock.
An ABB 1SDA057004R1, E6H5000PR122/P-LSI hold is particularly important where a changed release, connector, enclosure or calibration would affect a safety or process function.
Receiving and installation
Receive ABB 1SDA057004R1, E6H5000PR122/P-LSI against the complete order string and inspect its markings, terminals, accessories and packaging. Keep revision information with the asset record.
Install ABB 1SDA057004R1, E6H5000PR122/P-LSI only under the site's permit and isolation procedures. Use the manufacturer mounting and wiring instructions for the actual configuration.
Future spares decision
Archive the ABB 1SDA057004R1, E6H5000PR122/P-LSI approval, supplier documentation and installation drawing together. That record allows a later buyer to distinguish an approved supersession from a merely similar code.
When the next ABB 1SDA057004R1, E6H5000PR122/P-LSI spare is requested, recheck duty, firmware or approval changes against the current equipment rather than relying on a historic price line.
Decision record
Release ABB 1SDA057004R1, E6H5000PR122/P-LSI only when the full designation, site fit and acceptance result agree.
Keep the ABB 1SDA057004R1, E6H5000PR122/P-LSI manufacturer reference, inspection and commissioning evidence with the equipment file.
