ABB 1SFA619920R8053 selection record
ABB 1SFA619920R8053 is the identified yellow protective shroud for the CA1 compact emergency-stop shrouds application. The shared product-category image is a reference, not a photograph certifying the exact ABB 1SFA619920R8053 configuration.
The ABB 1SFA619920R8053 technical table separates manufacturer-stated identity from the installation checks that depend on the particular host device.
Key technical data and selection notes
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 1SFA619920R8053 |
| Product family | CA1 compact emergency-stop shrouds |
| Component role | yellow protective shroud |
| Exact ABB order reference | 1SFA619920R8053 |
| ABB product series | CA1 compact emergency-stop shrouds |
| ABB order code | 1SFA619920R8053 |
| Manufacturer designation | CA1-8053 |
| ABB use | Shroud for compact emergency stop |
| Color | Yellow |
| Boundary | Confirm mating compact operator and panel fit |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
At-a-glance procurement checks
- Confirm the complete ABB 1SFA619920R8053 order code and package marking.
- Match ABB 1SFA619920R8053 to the host, drawings and approved accessory position.
- Record the required electrical or mechanical limits before fitting ABB 1SFA619920R8053.
Compatibility evidence
For ABB 1SFA619920R8053, check host operator, enclosure clearance and access. Retain the host label, order code and drawing revision used for the decision.
If a substitute is proposed for ABB 1SFA619920R8053, require a documented comparison of every changed terminal, rating, supplied piece and approved host.
Installed-system role
ABB 1SFA619920R8053 is intended to guard the approved compact emergency-stop operator. Identify its place in the circuit before comparing visually similar accessories.
A manufacturer family prefix does not prove that ABB 1SFA619920R8053 has the same contact count, supply, pole arrangement or software interface as another listed option.
Receiving and storage
When ABB 1SFA619920R8053 arrives, compare the carton, device marking and purchase record. Inspect terminals, release mechanisms, molded parts and accessory contents as applicable.
Keep ABB 1SFA619920R8053 isolated from usable stock if its code or condition differs. Resolve the discrepancy before the scheduled shutdown.
Commissioning record
After installing ABB 1SFA619920R8053, check access, release and intentional operation. Test normal operation and the relevant inhibited or fault state under an authorized procedure.
Archive ABB 1SFA619920R8053 as-left identity, settings, results and sign-off. An indicator or mechanical fit alone does not establish full circuit acceptance.
Safe installation
Isolate and verify all applicable energy sources before installing ABB 1SFA619920R8053. Follow ABB and site requirements for lockout, stored energy and breaker operating springs.
Record wiring and orientation before removing the old unit. Install ABB 1SFA619920R8053 with the approved mounting and recheck protective covers and clearances.
Future purchase boundary
Keep ABB 1SFA619920R8053 and its exact host in the maintenance register. Include any pole, voltage, feature or option restriction beside the stock record.
For later ABB 1SFA619920R8053 enquiries, use the full code and verified installation evidence rather than a shortened series name.
Procurement handover
State ABB 1SFA619920R8053, quantity and host equipment on the purchase request.
File the ABB 1SFA619920R8053 delivery identity and acceptance test in the equipment history.
