ABB 3BDH000012R1 technical selection record
ABB 3BDH000012R1 is the representative reference for the SD802F series. Its decision starts with the intended duty: supply a compatible controller assembly. The technical values below identify this representative, not every series variant.
Technical reference for the representative
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 3BDH000012R1 |
| Product family | SD802F |
| Component role | Freelance controller power supply |
| Exact ABB order reference | 3BDH000012R1 |
| ABB product series | SD802F |
| ABB type | SD802F |
| Output | 24 V DC family role |
| Host | Freelance FHF2K/AC800F compatibility check |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
Use the delivered ABB 3BDH000012R1 marking and current manufacturer documentation to confirm all limits and options before engineering approval.
Decision 1 — identify the actual function
For ABB 3BDH000012R1, document the existing device's job, connected circuit and expected behavior. The Freelance controller power supply description helps browsing, but does not prove interchangeability.
Check whether ABB 3BDH000012R1 is a direct maintenance replacement or part of a revised design. Treat any changed function as an engineering decision.
Decision 3 — document procurement boundaries
Quote ABB 3BDH000012R1 with its complete designation and the approved series, function and application. Ask suppliers to identify every proposed change to current rating, options, firmware or accessories.
Keep ABB 3BDH000012R1 separate from apparently similar products in another ABB series. Cross-series pairing requires explicit manufacturer compatibility evidence.
Decision 5 — commission and retain evidence
Install ABB 3BDH000012R1 only under the approved isolation and commissioning procedure, then check output and controller start sequence. Record observed results against the design intent.
Store the ABB 3BDH000012R1 test record with the asset tag, drawing revision and order history so a later technician can verify the exact configuration.
Decision 2 — compare electrical and mechanical interfaces
Before specifying ABB 3BDH000012R1, verify controller frame, voltage and connector. Compare drawings and the real installation, including terminals, clearances, mounting and the relevant supply.
The ABB SD802F family contains order references with possible differences. For ABB 3BDH000012R1, a matching series name is insufficient without a full rating and connection check.
Decision 6 — plan a future replacement
A later replacement of ABB 3BDH000012R1 must be checked again for series, interfaces, ratings and approvals. The related references below are useful for enquiry, not automatic substitutes.
If ABB 3BDH000012R1 is unavailable, request a written comparison and repeat acceptance testing for any proposed alternate code.
Decision 4 — receive and inspect
When ABB 3BDH000012R1 arrives, compare the nameplate and order code with the purchase record. Check housing, connectors and supplied accessories for damage or omissions.
Place ABB 3BDH000012R1 on hold if the delivered marking differs from the accepted specification. Resolve the difference before installation.
Release criterion
Approve ABB 3BDH000012R1 after the identity, duty, interface and site test all agree with the approved specification.
Keep ABB 3BDH000012R1 and its exact order reference on the final equipment record; series grouping is for navigation and selection review.
