Evaluating ABB 1TNA920005R2102 for the intended circuit
ABB 1TNA920005R2102 is the representative reference for the TK201 series. Its decision starts with the intended duty: configure a compatible M10x or MDx motor controller. The technical values below identify this representative, not every series variant.
Technical reference for the representative
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 1TNA920005R2102 |
| Product family | TK201 |
| Component role | motor-controller parameterization kit |
| Exact ABB order reference | 1TNA920005R2102 |
| ABB product series | TK201 |
| ABB type | TK201 |
| Components | USB/miniUSB cable and software |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
Use the delivered ABB 1TNA920005R2102 marking and current manufacturer documentation to confirm all limits and options before engineering approval.
Decision 3 — document procurement boundaries
Quote ABB 1TNA920005R2102 with its complete designation and the approved series, function and application. Ask suppliers to identify every proposed change to current rating, options, firmware or accessories.
Keep ABB 1TNA920005R2102 separate from apparently similar products in another ABB series. Cross-series pairing requires explicit manufacturer compatibility evidence.
Decision 1 — identify the actual function
For ABB 1TNA920005R2102, document the existing device's job, connected circuit and expected behavior. The motor-controller parameterization kit description helps browsing, but does not prove interchangeability.
Check whether ABB 1TNA920005R2102 is a direct maintenance replacement or part of a revised design. Treat any changed function as an engineering decision.
Decision 2 — compare electrical and mechanical interfaces
Before specifying ABB 1TNA920005R2102, verify host generation, software and service-port access. Compare drawings and the real installation, including terminals, clearances, mounting and the relevant supply.
The ABB TK201 family contains order references with possible differences. For ABB 1TNA920005R2102, a matching series name is insufficient without a full rating and connection check.
Decision 5 — commission and retain evidence
Install ABB 1TNA920005R2102 only under the approved isolation and commissioning procedure, then confirm a read-only parameter connection. Record observed results against the design intent.
Store the ABB 1TNA920005R2102 test record with the asset tag, drawing revision and order history so a later technician can verify the exact configuration.
Decision 4 — receive and inspect
When ABB 1TNA920005R2102 arrives, compare the nameplate and order code with the purchase record. Check housing, connectors and supplied accessories for damage or omissions.
Place ABB 1TNA920005R2102 on hold if the delivered marking differs from the accepted specification. Resolve the difference before installation.
Decision 6 — plan a future replacement
A later replacement of ABB 1TNA920005R2102 must be checked again for series, interfaces, ratings and approvals. The related references below are useful for enquiry, not automatic substitutes.
If ABB 1TNA920005R2102 is unavailable, request a written comparison and repeat acceptance testing for any proposed alternate code.
Release criterion
Approve ABB 1TNA920005R2102 after the identity, duty, interface and site test all agree with the approved specification.
Keep ABB 1TNA920005R2102 and its exact order reference on the final equipment record; series grouping is for navigation and selection review.
