Technical fit record for ABB A210-30-11 ,1SFL511001R8411
ABB A210-30-11 ,1SFL511001R8411 is indexed here as a specific buying and service reference. Confirm its complete designation before assuming that another family member has the same terminals, electrical duty or approvals.
Verified technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | A210-30-11 ,1SFL511001R8411 |
| Product family | A210 |
| Component role | three-pole industrial contactor with 110 V coil |
| Device | A210-30-11 contactor |
| Main poles | 3 normally open |
| Auxiliaries | 1 NO + 1 NC |
| Control coil | 110–120 V AC, 50/60 Hz catalog designation |
| Order code | 1SFL511001R8411 |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The table for ABB A210-30-11 ,1SFL511001R8411 separates verified family data from the configuration checks that still require a nameplate or ABB order record. Do not use a family rating as an unconditional guarantee for the installed unit.
Purchase decision
Specify ABB A210-30-11 ,1SFL511001R8411 against a particular asset tag and duty. This unit is used to switch a specified motor or power load; record the intended circuit, process or equipment location before requesting a quote.
For A210-30-11 ,1SFL511001R8411, confirm AC-3 duty, coil supply, starter overload and bar connections. A matching short family name is not sufficient evidence of electrical, mechanical or software interchangeability.
Interface checklist
Before ordering A210-30-11 ,1SFL511001R8411, compare the installed terminal or connector arrangement, power source, mounting envelope and ancillary hardware with the current drawing.
Document the serial number and revision of A210-30-11 ,1SFL511001R8411 where available. If a supplier proposes a substitute, obtain engineering acceptance for every changed interface.
Site preparation
Plan the A210-30-11 ,1SFL511001R8411 replacement under the facility isolation and permit rules. Preserve photographs, configuration files, settings and a diagnostic baseline before disturbing wiring.
Check enclosure temperature, grounding, segregation and protection coordination for A210-30-11 ,1SFL511001R8411. Record any accessory that is supplied separately rather than assuming it is in the device box.
Receipt inspection
On arrival, compare the supplied A210-30-11 ,1SFL511001R8411 label and order code with the approved purchase description. Inspect packaging, terminals, seals and visible damage.
Do not install A210-30-11 ,1SFL511001R8411 when the shipped suffix, control voltage, release or approval differs from the approved build; resolve that discrepancy before commissioning.
Commissioning evidence
For A210-30-11 ,1SFL511001R8411, test pickup, drop-out and each main pole. Carry out only the tests approved for this device and the connected installation.
Save the as-left settings, measured results, witness and work-order reference for A210-30-11 ,1SFL511001R8411. Any temporary bypass or inhibited alarm must be removed before normal operation.
Lifecycle handover
Keep ABB A210-30-11 ,1SFL511001R8411 linked to its exact spares description, drawings and current manual revision. This helps the next maintenance team identify the same configuration rather than a superficially similar item.
Review the first operating period of A210-30-11 ,1SFL511001R8411 for alarms, heating, drift or switching anomalies and update the asset record if the installed build differs from the original request.
Related configuration references
The following A210 codes are recorded with ABB A210-30-11 ,1SFL511001R8411 for enquiry. Suffixes may alter ratings, dimensions, approvals or accessories; these are not automatic replacements.
- A210-30-11-84 , 1SFL511001R8411
Information to send with an enquiry
Quote ABB A210-30-11 ,1SFL511001R8411 exactly and include the asset tag, electrical or process duty, required accessories and delivery documentation.
For A210-30-11 ,1SFL511001R8411, request written confirmation of any deviation from the fitted unit before accepting an alternative.
