Service and interface record: ABB XT2N 160 TMA 100-1000 3p F F(1SDA067018R1)
Use ABB XT2N 160 TMA 100-1000 3p F F(1SDA067018R1) as the complete reference for this equipment position. Matching a family name alone does not establish module fit, electrical ratings or permitted service configuration.
Technical parameters and limits
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | XT2N 160 TMA 100-1000 3p F F(1SDA067018R1) |
| Product family | XT2N |
| Component role | Tmax XT2N three-pole molded-case breaker |
| Frame | XT2N 160 |
| Poles | 3 |
| Release | TMA adjustable thermal-magnetic |
| Rated current | 100 A reference |
| ABB code | 1SDA067018R1 |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The XT2N 160 TMA 100-1000 3p F F(1SDA067018R1) values above are selection checkpoints. Check the fitted nameplate and current ABB installation documents before releasing a replacement or changing field wiring.
Connection evidence
For XT2N 160 TMA 100-1000 3p F F(1SDA067018R1), inspect long-time and instantaneous setting, fault study, terminals and accessories. Verify the exact terminals, power path, mechanical keying and software interface against the site drawing.
If a proposed XT2N 160 TMA 100-1000 3p F F(1SDA067018R1) has different connectors or ratings, stop the swap and document the engineering decision rather than assuming series compatibility.
Before energizing
Isolate the affected circuit before working on XT2N 160 TMA 100-1000 3p F F(1SDA067018R1), following the plant procedure. Preserve wiring photos, parameters and a known-good diagnostic snapshot.
Seat and terminate XT2N 160 TMA 100-1000 3p F F(1SDA067018R1) with the specified accessories. Check grounding, segregation and installation environment before power is restored.
Acceptance test
For XT2N 160 TMA 100-1000 3p F F(1SDA067018R1), verify settings and trip behavior against the coordination study. Record the result, witness and acceptance date, including any temporary bypass or inhibited alarm that must be removed.
Close the XT2N 160 TMA 100-1000 3p F F(1SDA067018R1) work order only when as-left settings and drawings reflect the actual installation.
Asset purpose
ABB XT2N 160 TMA 100-1000 3p F F(1SDA067018R1) is intended to protect the assigned three-pole feeder with its TMA release. Record the cabinet, circuit or loop tag and the controlled process so the purchase is linked to a defined duty.
A XT2N 160 TMA 100-1000 3p F F(1SDA067018R1) replacement request should identify the installed hardware revision and the reason for change, including any active alarm or failed test.
Diagnostic baseline
For later troubleshooting of XT2N 160 TMA 100-1000 3p F F(1SDA067018R1), capture supply status, module diagnostics, output state and the relevant process reading. This makes it possible to distinguish a device fault from a field issue.
Compare XT2N 160 TMA 100-1000 3p F F(1SDA067018R1) with the pre-change baseline after installation. Investigate unexpected alarms, temperature, noise or switching before returning the asset to normal duty.
Other configuration references
These XT2N references are indexed alongside ABB XT2N 160 TMA 100-1000 3p F F(1SDA067018R1) for enquiry. Different options, ratings or approvals may apply, so the codes are not automatic substitutes.
No additional unassigned XT2N designation is grouped under XT2N 160 TMA 100-1000 3p F F(1SDA067018R1).
Procurement handoff
Quote ABB XT2N 160 TMA 100-1000 3p F F(1SDA067018R1) exactly, including the application tag, required accessories, installation conditions and documentation revision.
At receipt, compare the supplied XT2N 160 TMA 100-1000 3p F F(1SDA067018R1) against the approved code before fitting. Retain the acceptance evidence with the asset record.
