ABB AF210-30-11-70 (1SFL517001R7011): field fit and operating duty
ABB AF210-30-11-70 (1SFL517001R7011) should be specified as a complete device, not inferred from a similar family name. Its protection, control or measurement role must match the actual equipment and installation.
Technical data for model selection
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | AF210-30-11-70 (1SFL517001R7011) |
| Product family | AF210 |
| Component role | large-frame AF contactor |
| Main contacts | 3 normally open |
| Auxiliary | 1 NO + 1 NC arrangement |
| Coil | 100–250 V AC/DC |
| Order code | 1SFL517001R7011 |
| Lifecycle | Confirm replacement support for legacy AF210 |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The stated AF210-30-11-70 (1SFL517001R7011) data identify the selected reference and its engineering boundaries. Confirm the unit label, applicable standard and exact options before ordering or energizing.
What must match
Check AF210-30-11-70 (1SFL517001R7011) against AC-3 duty, coil supply, bar terminals, overload and panel clearances. In procurement, ask for photographs or ABB documentation that show the complete designation and terminal configuration.
If the candidate AF210-30-11-70 (1SFL517001R7011) differs from the installed device, document the difference and obtain an engineering decision before fitment.
Installation controls
Before working on AF210-30-11-70 (1SFL517001R7011), apply the approved isolation and permit controls. Capture the existing connections, settings and safety functions as a recoverable baseline.
Install AF210-30-11-70 (1SFL517001R7011) with the correct conductor, panel spacing and environmental protection. Follow the ABB instructions for the specific construction rather than using a generic wiring assumption.
Handover evidence
For AF210-30-11-70 (1SFL517001R7011), prove contactor travel, all poles and auxiliary interlock. Record the measured result, witness and date beside the equipment tag.
Retain the final AF210-30-11-70 (1SFL517001R7011) designation, revision, settings and test outcome in the maintenance record so later work does not rely on memory.
Design intent
The intended duty of AF210-30-11-70 (1SFL517001R7011) is to switch the specified large motor or distribution load. Mark the circuit, asset or process tag and preserve the plant drawing that governs this function.
Do not assume a different suffix within AF210 provides the same duty as AF210-30-11-70 (1SFL517001R7011); ratings and accessory arrangements can differ.
Fault-finding baseline
For a future fault involving AF210-30-11-70 (1SFL517001R7011), keep records of upstream supply, load, trip or output state and connected accessories. This separates a device issue from a wiring or process issue.
A replacement AF210-30-11-70 (1SFL517001R7011) should be checked at the same duty point as the prior installation, with abnormal behavior investigated before return to service.
Related model references
The following AF210 codes are indexed with ABB AF210-30-11-70 (1SFL517001R7011) for search and enquiry. They remain configuration-specific; this grouping does not assert electrical, mechanical or approval interchangeability.
- AF210-30-11
- AF210-30-11-70(100-250V 50/60HZ)
Enquiry checklist
Send the exact ABB AF210-30-11-70 (1SFL517001R7011) designation with circuit or plant tag, required rating, accessories and approval. Confirm current lifecycle and delivery scope.
On receipt of AF210-30-11-70 (1SFL517001R7011), compare label, package contents and documentation to the approved request. Hold any discrepancy for review before fitting.
