ABB OT1600E11, 1SCA113106R1001 technical application brief
Use ABB OT1600E11, 1SCA113106R1001 as the complete reference for this equipment position. Matching a family name alone does not establish module fit, electrical ratings or permitted service configuration.
Technical parameters and limits
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | OT1600E11, 1SCA113106R1001 |
| Product family | OT1600E11 |
| Component role | two-pole front-operated switch-disconnector |
| Device | Switch-disconnector; not a circuit breaker |
| Poles | 2 |
| Rated current | 1600 A class |
| Mounting | Base-mounted, front-operated |
| ABB order code | 1SCA113106R1001 |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The OT1600E11, 1SCA113106R1001 values above are selection checkpoints. Check the fitted nameplate and current ABB installation documents before releasing a replacement or changing field wiring.
Asset purpose
ABB OT1600E11, 1SCA113106R1001 is intended to isolate the specified high-current feeder. Record the cabinet, circuit or loop tag and the controlled process so the purchase is linked to a defined duty.
A OT1600E11, 1SCA113106R1001 replacement request should identify the installed hardware revision and the reason for change, including any active alarm or failed test.
Connection evidence
For OT1600E11, 1SCA113106R1001, inspect working voltage, utilization category, handle and shaft selection, conductor clearance and lockout. Verify the exact terminals, power path, mechanical keying and software interface against the site drawing.
If a proposed OT1600E11, 1SCA113106R1001 has different connectors or ratings, stop the swap and document the engineering decision rather than assuming series compatibility.
Before energizing
Isolate the affected circuit before working on OT1600E11, 1SCA113106R1001, following the plant procedure. Preserve wiring photos, parameters and a known-good diagnostic snapshot.
Seat and terminate OT1600E11, 1SCA113106R1001 with the specified accessories. Check grounding, segregation and installation environment before power is restored.
Diagnostic baseline
For later troubleshooting of OT1600E11, 1SCA113106R1001, capture supply status, module diagnostics, output state and the relevant process reading. This makes it possible to distinguish a device fault from a field issue.
Compare OT1600E11, 1SCA113106R1001 with the pre-change baseline after installation. Investigate unexpected alarms, temperature, noise or switching before returning the asset to normal duty.
Acceptance test
For OT1600E11, 1SCA113106R1001, verify positive isolation and mechanically sound switching. Record the result, witness and acceptance date, including any temporary bypass or inhibited alarm that must be removed.
Close the OT1600E11, 1SCA113106R1001 work order only when as-left settings and drawings reflect the actual installation.
Other configuration references
These OT1600E11 references are indexed alongside ABB OT1600E11, 1SCA113106R1001 for enquiry. Different options, ratings or approvals may apply, so the codes are not automatic substitutes.
No additional unassigned OT1600E11 designation is grouped under OT1600E11, 1SCA113106R1001.
Procurement handoff
Quote ABB OT1600E11, 1SCA113106R1001 exactly, including the application tag, required accessories, installation conditions and documentation revision.
At receipt, compare the supplied OT1600E11, 1SCA113106R1001 against the approved code before fitting. Retain the acceptance evidence with the asset record.
