1SBL277001R1300, AF30-30-00-13: coil supply and feeder coordination dossier
ABB lists order code 1SBL277001R1300 for the AF30-30-00-13 contactor and identifies the -13 electronically controlled coil with a broad 100–250 V AC/DC range. Final load capacity depends on utilization category and operating voltage.
Verified identification and technical data
| Technical item | Verified value / selection note |
|---|---|
| Order code | 1SBL277001R1300 |
| Type | AF30-30-00-13 |
| Main poles | 3 normally open main contacts |
| Control voltage class | 100–250 V AC 50/60 Hz or DC for -13 code |
| Application | Motor or general load switching; verify utilization category |
| Protection | Separate overload and short-circuit coordination required |
For 1SBL277001R1300, AF30-30-00-13, the table is an identification and selection aid. A nameplate, ABB order record and the actual installation still govern the final configuration.
Confirm the full type, revision and installation limits before treating any related code as a replacement.
Same-series designation index
The codes below share a product family or an identified order-code relationship with 1SBL277001R1300, AF30-30-00-13. They may differ in rating, software, connections, options or approvals; none is automatically interchangeable.
- 1SBL277001R1300
- AF30-30-00-13
- AF30-30-00-13 (1SBL277001R1300)
- AF30-30-00-13 , 100-250VAC
- AF30-30-00-13 1SBL277001R1300
- AF30-30-00-41,36 VAC,15KW
- AF30-30-11-12
Application decision
Review the duty before choosing 1SBL277001R1300, AF30-30-00-13. Choose the contactor from motor full-load current, start frequency, load type and expected electrical life. Include the upstream protective device and overload relay when assessing a motor feeder.
The decision for 1SBL277001R1300, AF30-30-00-13 should record actual load or process limits, operating environment, normal behavior and the response to a fault. This avoids a selection based only on a familiar series name.
Order and compatibility gate
When specifying 1SBL277001R1300, AF30-30-00-13, Check the exact coil suffix, auxiliary-contact arrangement, mechanical interlock if used and mounting space. Other AF30 variants can have different coil voltage or built-in contact options.
Send the full designation 1SBL277001R1300, AF30-30-00-13, hardware or serial revision, quantity, delivery need and nameplate photograph with the RFQ. Require written confirmation of any proposed successor or option-code change.
Installation and proving
For 1SBL277001R1300, AF30-30-00-13, Isolate both line and control supplies, check terminal marking and wiring, then energize with a controlled test. Prove pickup, drop-out, auxiliary feedback and protective trip sequencing.
Record the as-left settings, test results and installed interfaces of 1SBL277001R1300, AF30-30-00-13. Make the asset record searchable by the complete designation, not only by a short family label.
Handover record
The buyer and site engineer should agree on a single verified configuration for 1SBL277001R1300, AF30-30-00-13, including accessories, documentation and the accepted test procedure. Keep deviations visible to both procurement and maintenance.
Retain 1SBL277001R1300, AF30-30-00-13 in the purchase order, asset register and commissioning record. ABB family specifications help identify the device, but the approved project documents determine whether it is suitable for this installation.
