Commissioning brief: ABB CI527A 3BSE035684R1
Use the complete ABB CI527A 3BSE035684R1 designation for the purchase and asset record. The short family mark alone cannot establish electrical ratings, process options or interchangeability.
Technical selection record
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | CI527A 3BSE035684R1 |
| Product family | CI527A |
| Component role | PCI AF 100 communication board |
| Host interface | Half-length PCI, 3.3 V or 5 V compatible |
| Bus | AF 100 via two integrated twisted-pair modems |
| Redundancy | Redundant media and time synchronization supported |
| Part reference | 3BSE035684R1; verify nameplate |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
Values shown for CI527A 3BSE035684R1 are selection checkpoints. Confirm the fitted unit, nameplate and ABB documentation before releasing an order or a site change.
Fit and interface gate
Compare CI527A 3BSE035684R1 with the existing installation for PCI slot, OPC Server version, bus cabling, modem termination, time sync and host operating environment. Keep photos of the nameplate, terminals and accessory arrangement with the enquiry.
If any connector, protective rating or configuration item differs, hold the CI527A 3BSE035684R1 substitution for engineering review.
Application decision
The intended duty of CI527A 3BSE035684R1 is to provide the AF 100 link for the supported AC 100 OPC Server workstation. Record the controlled asset, panel location and circuit or process tag next to the exact code.
A specification for CI527A 3BSE035684R1 should state the operating conditions rather than assuming another CI527A item is a drop-in replacement.
Acceptance evidence
At handover for CI527A 3BSE035684R1, prove OPC data exchange and both bus paths after installation. Record who witnessed the test, the measured results and any open action.
The CI527A 3BSE035684R1 asset record should retain the final configuration, revision and commissioning evidence for later troubleshooting.
Installation sequence
Before fitting CI527A 3BSE035684R1, isolate the affected system by the plant procedure and preserve the approved settings or wiring schedule. Verify mechanical seating and each identified connection.
After connecting CI527A 3BSE035684R1, check power, communications and local indications before enabling the controlled equipment.
Related configuration codes
Other CI527A designations recorded with CI527A 3BSE035684R1 are shown below for search and enquiry. Their options and ratings can differ; the list does not claim automatic interchangeability.
No further unassigned CI527A designation is grouped with CI527A 3BSE035684R1 on this page.
Purchase handoff
Quote the complete CI527A 3BSE035684R1 designation, the installation tag and the critical interface checks. Ask for nameplate and revision confirmation before dispatch.
When CI527A 3BSE035684R1 arrives, compare the received unit to the approved selection record and document the final acceptance result.
