CI869 3BSE049110R1 application and acceptance notes
CI869 3BSE049110R1 is the complete reference for this Advant Fieldbus 100 controller interface. Use the exact code, not only the family name, when reviewing a replacement or preparing an enquiry. The final site decision depends on the installed circuit and the marked hardware revision.
Technical identification
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | CI869 3BSE049110R1 |
| Product family | CI869 |
| Component role | Advant Fieldbus 100 controller interface |
| Fieldbus | Advant Fieldbus 100 |
| Package | CI869 module plus TP869 baseplate in CI869K01 kit |
| Package order code | 3BSE049110R1 |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
These CI869 3BSE049110R1 details establish the selection baseline. Check the unit label and current ABB documentation for any option or approval that is not explicit in the technical table.
What must match?
The critical CI869 3BSE049110R1 comparison is: Check baseplate, modem/media, bus station addressing, project configuration and compatibility with the existing nodes. Confirm each difference with the supplier and the site engineer before approving it.
Document the terminal arrangement, supply, protective coordination or communications mapping relevant to CI869 3BSE049110R1. An alternative code can require a changed parameter set, mounting layout or approval.
What proves it works?
For CI869 3BSE049110R1, the acceptance action is: Verify segment discovery, process-data exchange and fault recovery without disrupting the live plant. Record the actual observed result, not only the power-on indication.
Retain a signed record of the CI869 3BSE049110R1 test together with faults, corrections and the final nameplate information for later maintenance and procurement.
Duty at this site
For CI869 3BSE049110R1, the expected duty is: Preserve communication between the AC 800M controller and its legacy AF 100 segment. Identify the source, the connected equipment and the permissive or alarm logic before ordering.
A useful handover record for CI869 3BSE049110R1 includes the drawing reference, ambient condition and the operating duty. This helps distinguish a genuine equivalent from a merely similar-looking device.
Before energizing
Inspect CI869 3BSE049110R1 and its connected wiring under the approved isolation procedure. Compare the delivered code with the order, then check mechanical seating, terminals and required accessories.
Restore only reviewed settings for CI869 3BSE049110R1. If the original assembly contains safety or protection functions, follow the plant's dedicated validation plan before operating the load.
Codes grouped with this model
Other CI869 codes are listed here for search and procurement reference. Their suffixes may change the coil, ratings, channel layout, interfaces or accessories, so they are not declared interchangeable with CI869 3BSE049110R1.
There is no additional unassigned CI869 designation grouped with CI869 3BSE049110R1 here.
For the purchase enquiry
State the full CI869 3BSE049110R1 code, installed machine or panel, quantity, required condition and delivery destination. Ask for a matching datasheet and the supplied hardware revision.
If CI869 3BSE049110R1 is offered as a substitute or updated spare, request a written cross-reference covering mechanical fit, wiring, ratings and required project changes before approval.
