Field checklist for ABB PS1-2-0-65 , 1SAM201906R1102
Start the ABB PS1-2-0-65 , 1SAM201906R1102 enquiry with a precise equipment identity and a defined plant function. The verified values below establish a technical baseline; they do not replace checking the delivered unit.
Verified parameters and fit limits
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | PS1-2-0-65 , 1SAM201906R1102 |
| Product family | PS1 |
| Component role | 65 A manual-motor-starter three-phase busbar |
| Type | PS1-2-0-65 |
| Order code | 1SAM201906R1102 |
| Rated current | 65 A |
| Poles | 3 |
| Stations | Two compatible manual motor starters |
| Use | Common supply distribution accessory |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
Before signing off PS1-2-0-65 , 1SAM201906R1102, check the current ABB documentation and the actual nameplate. Family-level information must not be used as a guaranteed option for every configuration.
Which interfaces must match?
For PS1-2-0-65 , 1SAM201906R1102, confirm MS116/MS132 fit, feed terminal and upstream protection. Compare the original label, mounting, field terminals and power/control supplies with the ABB product reference.
Keep the PS1-2-0-65 , 1SAM201906R1102 electrical or network interface unchanged unless engineering has approved the revised drawing, settings and test scope.
What problem does it solve?
ABB PS1-2-0-65 , 1SAM201906R1102 is selected to distribute the protected starter supply. State the actual circuit, loop or motor tag and the operating problem before deciding on a replacement.
A request for PS1-2-0-65 , 1SAM201906R1102 without site duty, installed revision or failure evidence can lead to a technically different part being offered.
What can cause a poor match?
A PS1-2-0-65 , 1SAM201906R1102 suffix or order-code difference may identify another coil, contact set, protocol, release, shaft or voltage. A matching appearance is not interchangeability evidence.
If the supplied PS1-2-0-65 , 1SAM201906R1102 differs from the approved item, quarantine it for review rather than changing field wiring to make it fit.
What changes at installation?
Installing PS1-2-0-65 , 1SAM201906R1102 may affect adjacent wiring, panel access and auxiliary accessories. Check clearance and isolate the correct energy sources under the site's permit system.
Before disturbing PS1-2-0-65 , 1SAM201906R1102, save photos, configuration, parameter values and an alarm baseline. Keep removed parts identifiable until acceptance is signed.
What should purchasing retain?
The ABB PS1-2-0-65 , 1SAM201906R1102 record should include the complete designation, required accessories, label evidence and the current installation manual revision.
For any proposed substitute to PS1-2-0-65 , 1SAM201906R1102, obtain written confirmation of every changed technical characteristic and the site's acceptance.
How is performance proved?
After approved installation of PS1-2-0-65 , 1SAM201906R1102, check shrouding, torque and phase continuity. Use only documented safe test methods and include connected equipment behavior.
Record the PS1-2-0-65 , 1SAM201906R1102 as-left results, asset tag, revision, date and witness. Restore alarms, interlocks and normal control before service handover.
Other codes in this same series
The following PS1 references can accompany an ABB PS1-2-0-65 , 1SAM201906R1102 enquiry. Suffix changes can affect ratings, fit or approvals, so none is an automatic replacement.
No other unassigned PS1 reference is grouped with PS1-2-0-65 , 1SAM201906R1102 in this release.
Enquiry and acceptance handoff
Quote ABB PS1-2-0-65 , 1SAM201906R1102 exactly, include the asset tag and duty, and request confirmation of any missing accessories or alternative build.
Keep the approved PS1-2-0-65 , 1SAM201906R1102 comparison, installation checks and test results in the maintenance record.
