Installed-equipment notes for RMIO-01
Keep the entire RMIO-01 designation with the maintenance request. RMIO-01 belongs to a specific equipment design; the visible family name alone is insufficient for a replacement decision.
Product data and selection limits
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | RMIO-01 |
| Product family | RMIO-01 |
| Component role | ACS800 motor control and I/O board |
| Drive context | ACS800 family |
| Function | Motor-control and I/O board |
| I/O | Analog and digital signals plus relay outputs |
| Revision | Confirm host drive and board revision |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
For RMIO-01, the table identifies useful checks but does not replace the marked unit and its complete technical documentation. Confirm option and revision details before purchase.
What the replacement must match
Before substituting RMIO-01, compare board revision, terminal plan, parameter backup, option-slot equipment and host drive. Check the exact code and nameplate against the purchase specification.
Do not call another RMIO-01 designation a direct replacement for RMIO-01 solely because its enclosure looks similar. Ratings and fitted options require separate confirmation.
Field fault isolation
For an unexplained RMIO-01 fault, note the present indicators and alarm history. Measure only at safe accessible test points according to the plant procedure.
When RMIO-01 interacts with a controller or protective system, verify the upstream command and downstream response independently before deciding which component failed.
Equipment role
The installed role of RMIO-01 is to interface the drive control program with the external field signals. Write down the connected circuit, controller or process tag and the equipment being served.
A failure around RMIO-01 may also arise from the supply, sensor, wiring, communications or mechanical accessory. Capture the symptoms before removing parts.
Commissioning handover
After fitting RMIO-01, test analog reference, digital commands, feedback and relay indications. Record the test method, readings, settings and any open deviation.
Release RMIO-01 for service only after the relevant protection, communication or measurement response has been witnessed and the asset record is updated.
Related family designations
These RMIO-01 designations are included with RMIO-01 to support model searches and enquiries. Individual specifications can differ, and they are not automatically interchangeable.
No other unassigned RMIO-01 code is grouped with RMIO-01 here.
Ordering record
Retain the RMIO-01 nameplate image, purchase code and configuration note with the quotation. Include the commissioning results when the unit is installed.
If a future RMIO-01 replacement is required, compare its complete code with the installed record again rather than relying on this page alone.
