Integration notes for ABB TU810 3BSE008524R1
ABB TU810 3BSE008524R1 is identified here by its complete designation. This page helps align the requested item with its site duty, interfaces and commissioning evidence; a family label alone is insufficient for substitution.
Technical data and configuration boundaries
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | TU810 3BSE008524R1 |
| Product family | TU810 |
| Component role | S800 compact termination unit |
| Family | S800 I/O compact MTU |
| Channels | 16-channel family arrangement |
| Role | Passive field termination |
| Code | 3BSE008524R1 legacy reference; check against installed part |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
Treat the figures and descriptions for TU810 3BSE008524R1 as verified selection references, then check the specific unit nameplate, official drawing and ordered options before installation.
Interface comparison
Before accepting TU810 3BSE008524R1, compare legacy TU810 versus TU810V1 version, module type, terminal map and field voltage. A difference in an apparently minor suffix can change the installation or communication behavior.
Photograph the existing TU810 3BSE008524R1 nameplate and connections when possible. Keep the comparison with the work order, including any required adapter or accessory.
Risk and installation controls
An installation involving TU810 3BSE008524R1 should follow the site isolation and permit process. Preserve the approved settings, drawings and test records before removing the old device.
Fit TU810 3BSE008524R1 only after the mechanical, electrical and environmental boundaries are understood. Check protective devices and termination torque against the applicable ABB instructions.
Proof of operation
For the TU810 3BSE008524R1 handover, verify continuity and each assigned channel after replacement. Document readings, operator observations and any exceptions before normal service is restored.
Archive the final TU810 3BSE008524R1 configuration, software or hardware revision and acceptance sign-off so future maintenance has a trustworthy baseline.
Where this item fits
The practical purpose of TU810 3BSE008524R1 is to terminate field wiring for the specified S800 I/O module. Identify the plant tag, controlled equipment and operating condition so the request describes a real application rather than a generic spare.
For TU810 3BSE008524R1, record whether the work is a planned replacement, a new installation or an emergency stock replenishment. Each route changes the evidence needed before release.
Other designations in this family
The following TU810 codes are grouped for search and enquiry with ABB TU810 3BSE008524R1. They may have different ratings, firmware, approvals or accessories and are not automatically interchangeable.
- TU810
Order and service handoff
State the exact ABB TU810 3BSE008524R1 code, plant tag, critical ratings and required documentation on the enquiry. Request confirmation of revision and accessory scope before dispatch.
On receipt, compare TU810 3BSE008524R1 against the approved request and hold any mismatch for engineering review. Keep the tested configuration with the asset record.
