From nameplate to commissioning: CBB10-30GKK-A2
Pepperl+Fuchs CBB10-30GKK-A2 is a capacitive proximity sensor used to detect a target by its capacitive response. This entry identifies the complete CBB10-30GKK-A2 designation and shows the technical data that can be used as a starting point. The shared main image is a Pepperl+Fuchs category reference montage, not an exact photograph of CBB10-30GKK-A2. Final selection still requires the fitted label, the latest manufacturer record and the actual site drawing.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Exact model | CBB10-30GKK-A2 |
| Product role | capacitive proximity sensor |
| Rated distance | 10 mm, flush mounting |
| Output | Complementary PNP |
| Supply | 10 to 30 V DC |
| Adjustment | Sensitivity potentiometer |
| Variant check | Confirm the complete designation and current manufacturer documentation before replacement. |
Installation record
For a replacement CBB10-30GKK-A2, compare the full printed code character by character. Confirm supply, I/O direction, signal type, terminal or plug pinout, operating environment and mechanical clearances. If the circuit has functional-safety or hazardous-area requirements, obtain the exact approval documents for CBB10-30GKK-A2; the visual similarity of another code is not a valid substitute. Include mating heads, reflectors, boards, cables and licences as separate line items where needed.
Process role
The job of CBB10-30GKK-A2 is to detect a target by its capacitive response. Define its boundary in the real installation: what connects upstream, what response is required downstream, how it is powered and how it is mounted. A model that looks like CBB10-30GKK-A2 may not provide the same circuitry or approvals. Capture the present configuration before removal, including any addresses, calibration, scaling, taught limits or software settings.
Test record
At commissioning, Test real target material and background at the operating gap. Test CBB10-30GKK-A2 in the assembled system using a known input or mechanical condition, then read the corresponding output and controller response. Repeat at the low and high ends of the real operating window. A status LED alone cannot prove that CBB10-30GKK-A2 has the correct settings, connected accessory or alarm action. Keep the measured values and any deviations in the maintenance record.
Order record
An RFQ for CBB10-30GKK-A2 should quote the complete designation, required quantity, installed controller or host, connection style, certification need and the intended operating environment. Request confirmation for any alternate suffix. Related-looking models are indexed below to help identify inventory, but technical table values on this page apply only to the named CBB10-30GKK-A2 variant where verified. Each other complete code needs its own specification review.
Related-looking model strings
These designations visually resemble CBB10-30GKK-A2; they can still have different functions, ratings, interfaces and approvals. Verify each complete code independently before ordering or substitution.
- CBB8 18GS75E2V1 237038
Close-out
After the handover of CBB10-30GKK-A2, archive the exact label, configuration backup, drawings and test result. If the process or host changes later, redo the relevant match and acceptance checks for CBB10-30GKK-A2. Do not treat the product montage or the related-code index as a wiring diagram or a declaration of interchangeability.
Further Pepperl+Fuchs look-alike model references
These are additional printed model strings grouped for product search only. A similar-looking code can describe another device, connection, rating or certification. It is not automatically a substitute for CBB10-30GKK-A2. Check the full manufacturer designation and the installed system independently.
- CBN10-F46C-E0-1.1M-AMP
- CCB10-30GS55-N1
- CCB10-30GS55-N1-V1
- CJ10-30GK-WO
- CJ15+U1+A2
