Confirming the installed interface for ASM58N-F2AK1A0GN-1213
Pepperl+Fuchs ASM58N-F2AK1A0GN-1213 is a absolute rotary encoder used to retain shaft position information across a power cycle. This entry identifies the complete ASM58N-F2AK1A0GN-1213 designation and shows the technical data that can be used as a starting point. The shared main image is a Pepperl+Fuchs category reference montage, not an exact photograph of ASM58N-F2AK1A0GN-1213. Final selection still requires the fitted label, the latest manufacturer record and the actual site drawing.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Exact model | ASM58N-F2AK1A0GN-1213 |
| Product role | absolute rotary encoder |
| Family | ASM58N absolute encoder |
| Housing | 58 mm class |
| Resolution | Verify exact complete code and installed parameter set |
| Connection | Confirm fitted cable or connector on the nameplate |
| Variant check | Confirm the complete designation and current manufacturer documentation before replacement. |
System boundary
The job of ASM58N-F2AK1A0GN-1213 is to retain shaft position information across a power cycle. Define its boundary in the real installation: what connects upstream, what response is required downstream, how it is powered and how it is mounted. A model that looks like ASM58N-F2AK1A0GN-1213 may not provide the same circuitry or approvals. Capture the present configuration before removal, including any addresses, calibration, scaling, taught limits or software settings.
Replacement gate
For a replacement ASM58N-F2AK1A0GN-1213, compare the full printed code character by character. Confirm supply, I/O direction, signal type, terminal or plug pinout, operating environment and mechanical clearances. If the circuit has functional-safety or hazardous-area requirements, obtain the exact approval documents for ASM58N-F2AK1A0GN-1213; the visual similarity of another code is not a valid substitute. Include mating heads, reflectors, boards, cables and licences as separate line items where needed.
Record the complete ASM58N-F2AK1A0GN-1213 code before comparing any similar-looking part.
Acceptance evidence
At commissioning, Check mechanical coupling, interface protocol and the controller's absolute count. Test ASM58N-F2AK1A0GN-1213 in the assembled system using a known input or mechanical condition, then read the corresponding output and controller response. Repeat at the low and high ends of the real operating window. A status LED alone cannot prove that ASM58N-F2AK1A0GN-1213 has the correct settings, connected accessory or alarm action. Keep the measured values and any deviations in the maintenance record.
Purchasing handoff
An RFQ for ASM58N-F2AK1A0GN-1213 should quote the complete designation, required quantity, installed controller or host, connection style, certification need and the intended operating environment. Request confirmation for any alternate suffix. Related-looking models are indexed below to help identify inventory, but technical table values on this page apply only to the named ASM58N-F2AK1A0GN-1213 variant where verified. Each other complete code needs its own specification review.
Related-looking model strings
These designations visually resemble ASM58N-F2AK1A0GN-1213; they can still have different functions, ratings, interfaces and approvals. Verify each complete code independently before ordering or substitution.
- AVM58N-011AAR0BN-1213
- AVM58N-011AAR0GN-1212
- AVM58N-011K1RHGN-1212
- AVM58N-012AAR0GN-1213
Close-out
After the handover of ASM58N-F2AK1A0GN-1213, archive the exact label, configuration backup, drawings and test result. If the process or host changes later, redo the relevant match and acceptance checks for ASM58N-F2AK1A0GN-1213. Do not treat the product montage or the related-code index as a wiring diagram or a declaration of interchangeability.
