Pepperl+Fuchs ICDM-RX/TCP-4DB9/2RJ45-DIN: selection memo for maintenance and purchasing
Pepperl+Fuchs ICDM-RX/TCP-4DB9/2RJ45-DIN is a serial-to-Ethernet communication gateway used to bring multiple serial devices onto an Ethernet network. This entry identifies the complete ICDM-RX/TCP-4DB9/2RJ45-DIN designation and shows the technical data that can be used as a starting point. The shared main image is a Pepperl+Fuchs category reference montage, not an exact photograph of ICDM-RX/TCP-4DB9/2RJ45-DIN. Final selection still requires the fitted label, the latest manufacturer record and the actual site drawing.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Exact model | ICDM-RX/TCP-4DB9/2RJ45-DIN |
| Product role | serial-to-Ethernet communication gateway |
| Serial connectors | 4 DB9 ports in designation |
| Ethernet | 2 RJ45, 10/100 ports |
| Supply | 5 to 30 V DC per installation manual |
| Mounting | DIN-rail adapter |
| Variant check | Confirm the complete designation and current manufacturer documentation before replacement. |
Decision memo
The job of ICDM-RX/TCP-4DB9/2RJ45-DIN is to bring multiple serial devices onto an Ethernet network. Define its boundary in the real installation: what connects upstream, what response is required downstream, how it is powered and how it is mounted. A model that looks like ICDM-RX/TCP-4DB9/2RJ45-DIN may not provide the same circuitry or approvals. Capture the present configuration before removal, including any addresses, calibration, scaling, taught limits or software settings.
Match the installed assembly
For a replacement ICDM-RX/TCP-4DB9/2RJ45-DIN, compare the full printed code character by character. Confirm supply, I/O direction, signal type, terminal or plug pinout, operating environment and mechanical clearances. If the circuit has functional-safety or hazardous-area requirements, obtain the exact approval documents for ICDM-RX/TCP-4DB9/2RJ45-DIN; the visual similarity of another code is not a valid substitute. Include mating heads, reflectors, boards, cables and licences as separate line items where needed.
Prove the function
At commissioning, Record IP setup, serial mode and redundant supply before changeover. Test ICDM-RX/TCP-4DB9/2RJ45-DIN in the assembled system using a known input or mechanical condition, then read the corresponding output and controller response. Repeat at the low and high ends of the real operating window. A status LED alone cannot prove that ICDM-RX/TCP-4DB9/2RJ45-DIN has the correct settings, connected accessory or alarm action. Keep the measured values and any deviations in the maintenance record.
Send a complete enquiry
An RFQ for ICDM-RX/TCP-4DB9/2RJ45-DIN should quote the complete designation, required quantity, installed controller or host, connection style, certification need and the intended operating environment. Request confirmation for any alternate suffix. Related-looking models are indexed below to help identify inventory, but technical table values on this page apply only to the named ICDM-RX/TCP-4DB9/2RJ45-DIN variant where verified. Each other complete code needs its own specification review.
Related-looking model strings
These designations visually resemble ICDM-RX/TCP-4DB9/2RJ45-DIN; they can still have different functions, ratings, interfaces and approvals. Verify each complete code independently before ordering or substitution.
No additional same-pattern code is grouped with ICDM-RX/TCP-4DB9/2RJ45-DIN here; any alternative requires its own review.
Close-out
After the handover of ICDM-RX/TCP-4DB9/2RJ45-DIN, archive the exact label, configuration backup, drawings and test result. If the process or host changes later, redo the relevant match and acceptance checks for ICDM-RX/TCP-4DB9/2RJ45-DIN. Do not treat the product montage or the related-code index as a wiring diagram or a declaration of interchangeability.
