Service brief for the exact INY030D-F99-2I2E2-V17 designation
Pepperl+Fuchs INY030D-F99-2I2E2-V17 is a two-axis inclination sensor used to measure machine tilt on two axes. This service brief separates the confirmed identity of INY030D-F99-2I2E2-V17 from the installation choices that must be checked on site. The shared Pepperl+Fuchs main image is an illustrative category montage, not an exact photograph of INY030D-F99-2I2E2-V17. Use the complete designation on the fitted label when enquiring or replacing the part.
Technical parameters at a glance
| Technical item | Verified value / selection note |
|---|---|
| Exact model | INY030D-F99-2I2E2-V17 |
| Product role | two-axis inclination sensor |
| Axes | 2 |
| Angle range | -15 to +15 degrees |
| Analog outputs | 2 x 4 to 20 mA |
| Supply | 10 to 30 V DC |
| Variant check | Confirm the complete designation and current manufacturer documentation before replacement. |
Installation question
At installation, Set a known horizontal reference and verify both current loops and PNP states. Confirm power is isolated where required and compare the connector or terminals against the current manufacturer documentation for INY030D-F99-2I2E2-V17. Verify safe-area and hazardous-area boundaries where applicable; the exact certificate and site wiring govern the final decision. Leave enough clearance for the fitted cable and normal service access.
What must the unit do?
In operation, INY030D-F99-2I2E2-V17 is intended to measure machine tilt on two axes. Establish the real input condition, the expected output response and the acceptance limit. Where an accessory, receiver, host card, reflector or magnet is required, include that matched part in the bill of materials. Do not infer that the picture or a neighbouring model code establishes compatibility for INY030D-F99-2I2E2-V17.
What evidence is retained?
Before ordering INY030D-F99-2I2E2-V17, photograph the nameplate and document what is connected on each side of the device. Check supply, signal or mechanical interface, mounting, environmental exposure and the receiving controller. The table is a compact technical reference for INY030D-F99-2I2E2-V17; a similar printed string can denote another function, rating or certification. Retain any parameter backup and the current drawing with the maintenance record.
Commission INY030D-F99-2I2E2-V17 with an observable, known condition rather than only checking an indicator lamp. Record at least two input states and their controller responses, then test the edge of the real working range where practical. If INY030D-F99-2I2E2-V17 is part of a safety or Ex installation, use the site's approved proof-test procedure and exact approval documents. Save settings, photos and measured results so a later replacement can be compared reliably.
What should purchasing quote?
A useful quotation request for INY030D-F99-2I2E2-V17 includes the full code, quantity, site function, connection type, any mating accessory and required approval. Ask the supplier to confirm every changed suffix on a proposed alternative. This page does not declare that other visually similar codes are interchangeable with INY030D-F99-2I2E2-V17; each requires its own data and fit review.
Visually related codes
The following model strings resemble INY030D-F99-2I2E2-V17 in print. They are collected for search and stock recognition only; electrical and mechanical functions can differ. Verify every complete designation independently.
No additional same-pattern designation is grouped with INY030D-F99-2I2E2-V17 in this selection.
Handover note
Keep the final INY030D-F99-2I2E2-V17 nameplate photo, fit check and test record with the machine file. Re-check the exact model whenever the host, process or installation environment changes.
