LB9107A: product identity, technical data and on-site acceptance checks
Pepperl+Fuchs LB9107A is a six-pole blue terminal block used for terminating field wiring on a compatible remote-I/O module. This page identifies the representative designation and the checks that matter when the device is selected for a real installation. The common product montage is a category reference image, not a photograph of the exact LB9107A unit. Compare the full label and current manufacturer data before committing a purchase or changing a live circuit.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Exact designation | LB9107A |
| Product type | six-pole blue terminal block |
| Connection | 6-pole screw terminal block |
| System fit | For LB and FB modules |
| Terminal markings | 1 to 6 |
| Color | Blue; for Ex ia/Ex ib application wiring |
| Variant boundary | Use the complete type code and current device label when selecting a replacement. |
Commissioning and maintenance
After fitting LB9107A, Check the terminal numbers, conductor retention and channel continuity after fitting. Record both the expected and observed behavior. Inspect indicators, fault response and controller diagnostics where provided. If the test does not match, verify wiring, configuration and connected equipment before assuming that a new LB9107A is defective.
Interface and installation fit
For LB9107A, LB9107A is a terminal block, not a standalone surge-protection device. Verify module fit and field wiring drawing. Review the mating equipment, supply path, mounting space, cable or terminal assignment and any required hazardous-area documentation. If the present installation has field-modified wiring or programming, photograph and record it before removal. The same-looking item can require different wiring or settings.
Operating role and application
In the intended system, LB9107A is used for terminating field wiring on a compatible remote-I/O module. Its role is not defined by the product picture or a shared prefix alone. Establish what arrives at the device, what leaves it and which controller, field instrument or mechanical component it must match. When LB9107A is ordered as a spare, preserve the complete suffix and all installed configuration information.
Procurement and replacement details
When requesting LB9107A, Order LB9107A as a compatible connector with the intended LB/FB base module. State operating environment, required certificates and the exact application. Request written confirmation for any proposed alternative. A reference model in the list below may belong to the same visible naming cluster but is not a default functional replacement for LB9107A.
Related designation references
The following catalog designations share the visible LB91 naming cluster with LB9107A. They are grouped to aid search and procurement, not to assert identical ratings, wiring, approvals or interchangeability. Each complete code must be checked separately against the required duty.
- LB9124A
- LB9113A
- LB9115A
- LB9130A
Final selection check
For LB9107A, confirm the latest datasheet and nameplate before ordering or commissioning. Retain the loop drawing, configuration and acceptance record with the maintenance file. The technical values above apply to LB9107A only where stated, not to every related designation.
Additional visually similar Pepperl+Fuchs model designations
These complete codes are collected for model search and identification because their printed designations look similar. They may represent different products, electrical interfaces, mechanical sizes or approvals. They are not declared interchangeable with LB9107A. Verify each complete designation against the manufacturer record and the installed equipment before ordering.
- LB1001A
- LB1103A
- LB1109A
- LB2103A
- LB3101A
- LB3102A2
- LB3105A
- LB4002A2
- LB4101A2
- LB6110A 541998
- LB7104A
- LB8106
- LB8106H0625
- LB8122A.1.EL
- LB9006
- LB9006C
- LB9022BP22320.1
- LB9023BP08110.1
- LB9025BP08100.1
