Practical specification review for Pepperl+Fuchs PMI120-F90-IU2EP-IO-V15 in a live plant
Pepperl+Fuchs PMI120-F90-IU2EP-IO-V15 is a inductive positioning sensor used for measuring linear position without mechanical contact. This page identifies the representative designation and the checks that matter when the device is selected for a real installation. The common product montage is a category reference image, not a photograph of the exact PMI120-F90-IU2EP-IO-V15 unit. Compare the full label and current manufacturer data before committing a purchase or changing a live circuit.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Exact designation | PMI120-F90-IU2EP-IO-V15 |
| Product type | inductive positioning sensor |
| Measuring range | 0 to 120 mm |
| Digital interface | IO-Link 1.1 |
| Analog output | Programmable current or voltage |
| Switch outputs | Two configurable push-pull outputs |
| Variant boundary | Use the complete type code and current device label when selecting a replacement. |
Buyer note — PMI120-F90-IU2EP-IO-V15: retain the complete ordering suffix and confirm connected equipment.
Procurement and replacement details
When requesting PMI120-F90-IU2EP-IO-V15, Include the saved IO-Link parameter set or analog scaling in the RFQ. State operating environment, required certificates and the exact application. Request written confirmation for any proposed alternative. A reference model in the list below may belong to the same visible naming cluster but is not a default functional replacement for PMI120-F90-IU2EP-IO-V15.
Operating role and application
In the intended system, PMI120-F90-IU2EP-IO-V15 is used for measuring linear position without mechanical contact. Its role is not defined by the product picture or a shared prefix alone. Establish what arrives at the device, what leaves it and which controller, field instrument or mechanical component it must match. When PMI120-F90-IU2EP-IO-V15 is ordered as a spare, preserve the complete suffix and all installed configuration information.
Interface and installation fit
For PMI120-F90-IU2EP-IO-V15, Check actuator geometry, target distance, programmed range, M12 connection and the controller's analog input mode. Review the mating equipment, supply path, mounting space, cable or terminal assignment and any required hazardous-area documentation. If the present installation has field-modified wiring or programming, photograph and record it before removal. The same-looking item can require different wiring or settings.
Commissioning and maintenance
After fitting PMI120-F90-IU2EP-IO-V15, Compare indicated position at two or more physical references and exercise both switch points. Record both the expected and observed behavior. Inspect indicators, fault response and controller diagnostics where provided. If the test does not match, verify wiring, configuration and connected equipment before assuming that a new PMI120-F90-IU2EP-IO-V15 is defective.
Related designation references
The following catalog designations share the visible PMI naming cluster with PMI120-F90-IU2EP-IO-V15. They are grouped to aid search and procurement, not to assert identical ratings, wiring, approvals or interchangeability. Each complete code must be checked separately against the required duty.
- PMI14V-F112-U-V3
- PMI210-F110-IU-V1
- PMI40-F90-IU2EP-IO-V15-3G-3D
Final selection check
For PMI120-F90-IU2EP-IO-V15, confirm the latest datasheet and nameplate before ordering or commissioning. Retain the loop drawing, configuration and acceptance record with the maintenance file. The technical values above apply to PMI120-F90-IU2EP-IO-V15 only where stated, not to every related designation.
