A practical field record for Pepperl+Fuchs MH 02-L
Pepperl+Fuchs MH 02-L is a adjustable sensor mounting aid selected to hold and position a sensor on a C-profile rail. The full MH 02-L code is the identification anchor for this page. The shared main montage illustrates the Pepperl+Fuchs category and is not a photograph of this exact option. Before using MH 02-L as a spare, compare the installed label and project drawing with the current manufacturer documentation.
Technical specification and identity
| Technical item | Verified value / selection note |
|---|---|
| Exact model | MH 02-L |
| Product role | adjustable sensor mounting aid |
| Part type | Mechanical mounting bracket |
| Profile rail | 70 mm supplied profile section |
| Sensor fixings | 2 M5 sliding blocks |
| Electrical rating | Not applicable; passive accessory |
| Variant check | Confirm the complete designation and current manufacturer documentation before replacement. |
Selection pathway
Start with the real duty of MH 02-L: hold and position a sensor on a C-profile rail. Then trace what connects to MH 02-L, including its power source, input or target, outgoing signal and mechanical support. Confirm C-rail shape, M5 sliding blocks and available adjustment. Record the actual site settings and the parts that are supplied separately. This matters because a near-identical type string can conceal a different output, connection, dimension or approval.
Exact-code checkpoint: MH 02-L must be confirmed against the fitted interface before substitution.
Installation and test
For installation of MH 02-L, document the existing assembly before disturbing it. Photograph the full label, terminals, cable exits, brackets and adjacent modules; mark conductors and save any controller or software configuration. Compare voltage, polarity, loading and environmental limits against the exact MH 02-L technical record. If MH 02-L is part of a safety or hazardous-area circuit, the site-approved design and certificates take precedence over an appearance match.
After fitting MH 02-L, prove its function in the completed system, not merely its power-on indication. Apply a known field condition, read the downstream controller or diagnostic tool, and repeat at both normal and limiting conditions. For MH 02-L, confirm c-rail shape, m5 sliding blocks and available adjustment. Capture the observed readings, alarm states and any parameter changes so the maintenance record explains why MH 02-L was accepted.
Supply record
When asking for MH 02-L, include the entire type code, quantity, installation location, applicable approval, mating connector or board and required accessories. Ask a supplier to confirm the exact MH 02-L designation in writing. A proposed equivalent must be checked independently for electrical behavior, mounting, software and certifications. The related codes below are search and identification references; they are not a declaration that they interchange with MH 02-L.
Related-looking designations
The following strings resemble MH 02-L in the supplied product family. Their full suffixes may change function, ratings, mechanical fit or approval; consult each exact manufacturer's record before a substitute is used.
- MH 04-2057B
- MH 04-2681F
- MH-UDB02
- MHW 01
Close-out note
For future service of MH 02-L, retain the final wiring diagram, settings, test result and replacement reference together. Recheck the data for MH 02-L if the connected controller, process conditions or regulatory setting changes. The table describes the named MH 02-L where a value is stated; do not extend those values automatically to another listed code.
