Where TVI40N-14TK0T6TN-01024 fits and what to verify before replacement
Pepperl+Fuchs TVI40N-14TK0T6TN-01024 is a compact incremental encoder selected to measure rotational movement where machine space is limited. The full TVI40N-14TK0T6TN-01024 code is the identification anchor for this page. The shared main montage illustrates the Pepperl+Fuchs category and is not a photograph of this exact option. Before using TVI40N-14TK0T6TN-01024 as a spare, compare the installed label and project drawing with the current manufacturer documentation.
Technical specification and identity
| Technical item | Verified value / selection note |
|---|---|
| Exact model | TVI40N-14TK0T6TN-01024 |
| Product role | compact incremental encoder |
| Family | TVI40N incremental encoder |
| Housing | 40 mm class |
| Resolution | 1024 pulses per revolution in this designation |
| Cable exit | Tangential |
| Variant check | Confirm the complete designation and current manufacturer documentation before replacement. |
Before the change
For installation of TVI40N-14TK0T6TN-01024, document the existing assembly before disturbing it. Photograph the full label, terminals, cable exits, brackets and adjacent modules; mark conductors and save any controller or software configuration. Compare voltage, polarity, loading and environmental limits against the exact TVI40N-14TK0T6TN-01024 technical record. If TVI40N-14TK0T6TN-01024 is part of a safety or hazardous-area circuit, the site-approved design and certificates take precedence over an appearance match.
Start with the real duty of TVI40N-14TK0T6TN-01024: measure rotational movement where machine space is limited. Then trace what connects to TVI40N-14TK0T6TN-01024, including its power source, input or target, outgoing signal and mechanical support. Check shaft coupling, tangential cable and controller signal levels. Record the actual site settings and the parts that are supplied separately. This matters because a near-identical type string can conceal a different output, connection, dimension or approval.
At commissioning
After fitting TVI40N-14TK0T6TN-01024, prove its function in the completed system, not merely its power-on indication. Apply a known field condition, read the downstream controller or diagnostic tool, and repeat at both normal and limiting conditions. For TVI40N-14TK0T6TN-01024, check shaft coupling, tangential cable and controller signal levels. Capture the observed readings, alarm states and any parameter changes so the maintenance record explains why TVI40N-14TK0T6TN-01024 was accepted.
At purchasing handoff
When asking for TVI40N-14TK0T6TN-01024, include the entire type code, quantity, installation location, applicable approval, mating connector or board and required accessories. Ask a supplier to confirm the exact TVI40N-14TK0T6TN-01024 designation in writing. A proposed equivalent must be checked independently for electrical behavior, mounting, software and certifications. The related codes below are search and identification references; they are not a declaration that they interchange with TVI40N-14TK0T6TN-01024.
Related-looking designations
The following strings resemble TVI40N-14TK0T6TN-01024 in the supplied product family. Their full suffixes may change function, ratings, mechanical fit or approval; consult each exact manufacturer's record before a substitute is used.
- TVI50N-09BK2R6TN-01024
- TVI50N-09BK5R6TN-00500
Close-out note
For future service of TVI40N-14TK0T6TN-01024, retain the final wiring diagram, settings, test result and replacement reference together. Recheck the data for TVI40N-14TK0T6TN-01024 if the connected controller, process conditions or regulatory setting changes. The table describes the named TVI40N-14TK0T6TN-01024 where a value is stated; do not extend those values automatically to another listed code.
