Field and buyer decisions for Pepperl+Fuchs PS1000-A6-24.10
Pepperl+Fuchs PS1000-A6-24.10 is a industrial DIN-rail power supply used for supplying regulated 24 V DC to an industrial control cabinet. This product page centers on the precise PS1000-A6-24.10 designation and practical fit decisions. Its shared montage is an illustrative category image, not a photograph of the exact variant. Confirm every site-specific electrical, mechanical and approval requirement against the current manufacturer's documentation before a purchase or changeover.
Technical data for the exact designation
| Technical item | Verified value / selection note |
|---|---|
| Exact model | PS1000-A6-24.10 |
| Product role | industrial DIN-rail power supply |
| Input | 100 to 240 V AC nominal, single phase |
| Output | 24 V DC, 10 A nominal |
| Adjustment | 24 to 28 V DC |
| Status | DC OK LED and relay contact |
| Variant check | Confirm the complete designation and current manufacturer documentation before replacement. |
Service brief
Use PS1000-A6-24.10 for supplying regulated 24 V DC to an industrial control cabinet. A service technician should identify the upstream and downstream interfaces before disturbing the connection.
Before the change
For PS1000-A6-24.10, calculate actual load and temperature derating, protective earth and cabinet ventilation. Record the installed nameplate, matching device, space envelope and existing configuration. An appearance match is only a starting point: signal direction, power, interface and certification must be considered separately.
After the change
With PS1000-A6-24.10 installed, measure output under load and test the DC OK contact. Compare observed values with a known test condition and record the controller or diagnostic response. Repeat at the relevant operating limits so that an intermittent wiring or setup problem does not go unnoticed.
Supply-chain check
For a PS1000-A6-24.10 enquiry, retain the exact A6-24.10 variant and confirm mounting clearances. Provide the full label, circuit or mounting drawing and operating conditions. Ask for written confirmation before accepting any substituted suffix, especially when a related-looking code has different terminals, approval or function.
Related-looking designations
These names visually resemble PS1000-A6-24.10 and are grouped as identification references. They may differ in function, circuit values, mounting, communications and hazardous-area approval. Do not apply the technical values of PS1000-A6-24.10 to another complete designation without its own specification.
- PS1000-A6-24.10.R
Final record
Keep the completed check with the maintenance history for PS1000-A6-24.10. If site conditions change, review the current datasheet and repeat the relevant electrical, mechanical and functional checks. The values in this page identify PS1000-A6-24.10 where stated; they do not define every visually related code.
