UC2000-30GM-IUR2-V15 ultrasonic sensor range, output scaling and installation decisions
Pepperl+Fuchs UC2000-30GM-IUR2-V15 measures distance without touching the object, using an ultrasonic echo. Its stated sensing range is 80 to 2000 mm, but the first 80 mm is a dead band and the programmable evaluation range starts farther out. Use UC2000-30GM-IUR2-V15 only after checking target geometry, acoustic reflections and output scaling. The common product montage is a reference image, not the exact device photograph.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Exact type | UC2000-30GM-IUR2-V15 |
| Detection method | Single-head ultrasonic echo measurement |
| Sensing range | 80 to 2000 mm |
| Adjustment range | 120 to 2000 mm |
| Dead band | 0 to 80 mm |
| Transducer frequency | Approximately 180 kHz |
| Output functions | Analog current and voltage outputs; verify programmed scaling |
| Mechanical form | M30 x 1.5 threaded body with V15 connection |
Range and target behavior
Place the working target inside the usable range of UC2000-30GM-IUR2-V15, leaving margin at both endpoints. The 80 to 2000 mm sensing specification is measured against a standard target; narrow, tilted, soft or irregular surfaces can behave differently. Check nearby structures and cross-talk from other ultrasonic devices during a real machine cycle.
Analog signal and programming
The UC2000-30GM-IUR2-V15 family provides current and voltage analog output functions and application-specific adjustment. Confirm the selected output, near/far scaling, controller input type and required update behavior. Record existing settings before replacement, then verify the measured distance against a physical reference at more than one point.
Installation and environmental review
Check the M30 thread, mounting rigidity, connector pinout, power supply, cable path and sensor-face exposure. Avoid placing the face where buildup, splashing or mechanical impact changes the sound path. Temperature compensation helps with ordinary changes, but process conditions and target material still require application testing.
Ordering and handover
When ordering UC2000-30GM-IUR2-V15, include the complete suffix, connection type, configured output range, target material, expected distance and controller input. If a related UC2000 housing is suggested, compare both the physical form and output electronics rather than treating UC2000 as a single interchangeable specification.
Related model references
These UC2000 designations are grouped here for identification only. Housing, range settings, signal outputs and connection details can differ.
- UC2000-30GM-2EP-IO-V15
- UC2000-30GM-E6R2-V15
- UC2000-30GM70-2E2R2-V15
- UC2000-L2-E5-V15
- UC2000-L2-I-V15
- UC2000-L2-U-V15
Manufacturer documentation
For UC2000-30GM-IUR2-V15, check the latest Pepperl+Fuchs datasheet and the complete label against the installed device before final selection or commissioning.
Additional visually similar Pepperl+Fuchs model designations
These complete codes are collected for model search and identification because their printed designations look similar. They may represent different products, electrical interfaces, mechanical sizes or approvals. They are not declared interchangeable with UC2000-30GM-IUR2-V15. Verify each complete designation against the manufacturer record and the installed equipment before ordering.
- UB 500-18GM75-I-V15
- UB100-F77-E2-V31
- UB1000-18GM75-I-V15
- UB2000-30GM-E2-V15
- UB2000-30GM-E5-V15
- UB2000-F42-E6-V15
- UB2000-F42-I-V15
- UB2000-F42-U-V15 133991
- UB250-F77-F-V31
- UB300-18GM40A-E5-V
- UB300-18GM40A-E5-V1
- UB400-12GM-I-V1-Y
- UB400-F77-EO-V31
- UB4000-30GM-E5-V15
- UB4000-F42-I-V15
- UB500-18GM75-E5-V15
- UB500-30GM-E5-V15
- UB500-F42S-E5-V15
- UB6000-30GM-E5-V15
- UB6000-F42-E6-V15
- UB6000-F42-I-V15
- UB800-18GM40-U-V1
- UB800-18GM60A-E5-V1-M
- UBE1000-18GM40-SE2-V1
- UBE1000-18GM40A-SE2-V1-Y205349
- UBE1000-18GM40A-SE2V1
- UBE4000-30GM-SA2-V15
- UBE800-F77-SE2-V31
- UBEC300-18GH40-SE2-V1
- UC-PROG-IR-USB
- UC1000-30GM-IUR2-K-V15
- UC10000-F260-IE8R2
- UC150-F77-EP-IO-V31
- UC250-F77-EP-IO-V31
- UC300-30GM-IUR2-V15
- UC3500-30GM70-UE2R2-V15 238393
- UC4000-30GM-IU-V1-HA
- UC4000-30GM-IUR2-V15
- UC4000-L2-I-V15
- UC500-30GM-IUR2-V15
- UC500-30GM70S-IE2R2-V15
- UC500-L2-E6-V15
- UC500-L2-I-V15
- UC500-L2M-E6-T-2M
- UC6000-30GM-2EP-IO-V15
- UCC3500-30GH70-IE2R2-V15
Further Pepperl+Fuchs look-alike model references
These are additional printed model strings grouped for product search only. A similar-looking code can describe another device, connection, rating or certification. It is not automatically a substitute for UC2000-30GM-IUR2-V15. Check the full manufacturer designation and the installed system independently.
- UDCM-30GS- 3EP-IO-0,2M-V1
- UMC3000-30H-E5-5M-3G-3D
