Checking LLR 04-1,6-0,5 WC3 from nameplate through commissioning
Pepperl+Fuchs LLR 04-1,6-0,5 WC3 is a glass-fiber optic cable accessory used for carrying light between an optical amplifier and a confined sensing point. This product page centers on the precise LLR 04-1,6-0,5 WC3 designation and practical fit decisions. Its shared montage is an illustrative category image, not a photograph of the exact variant. Confirm every site-specific electrical, mechanical and approval requirement against the current manufacturer's documentation before a purchase or changeover.
Technical data for the exact designation
| Technical item | Verified value / selection note |
|---|---|
| Exact model | LLR 04-1,6-0,5 WC3 |
| Product role | glass-fiber optic cable accessory |
| Part class | Passive fiber-optic cable |
| System fit | Pair with a compatible fiber-optic photoelectric amplifier |
| Optical behavior | Range depends on amplifier, target and fiber arrangement |
| Termination | Verify tip geometry and routing on actual assembly |
| Variant check | Confirm the complete designation and current manufacturer documentation before replacement. |
Follow the application path
The first decision for LLR 04-1,6-0,5 WC3 is where it sits in the process: carrying light between an optical amplifier and a confined sensing point. Follow the real signal or mechanical movement through the system before selecting the spare.
1. Match the interface
For LLR 04-1,6-0,5 WC3, match the amplifier port, fiber-tip position and minimum bend radius. Record the installed nameplate, matching device, space envelope and existing configuration. An appearance match is only a starting point: signal direction, power, interface and certification must be considered separately.
2. Prove the function
With LLR 04-1,6-0,5 WC3 installed, prove stable target detection after routing and fixing the fiber. Compare observed values with a known test condition and record the controller or diagnostic response. Repeat at the relevant operating limits so that an intermittent wiring or setup problem does not go unnoticed.
3. Close the purchasing record
For a LLR 04-1,6-0,5 WC3 enquiry, preserve the comma punctuation and WC3 fiber construction in the request. Provide the full label, circuit or mounting drawing and operating conditions. Ask for written confirmation before accepting any substituted suffix, especially when a related-looking code has different terminals, approval or function.
Related-looking designations
These names visually resemble LLR 04-1,6-0,5 WC3 and are grouped as identification references. They may differ in function, circuit values, mounting, communications and hazardous-area approval. Do not apply the technical values of LLR 04-1,6-0,5 WC3 to another complete designation without its own specification.
- LLR 04-2,2-0,18-W701210007
Final record
Keep the completed check with the maintenance history for LLR 04-1,6-0,5 WC3. If site conditions change, review the current datasheet and repeat the relevant electrical, mechanical and functional checks. The values in this page identify LLR 04-1,6-0,5 WC3 where stated; they do not define every visually related code.
