PCV000040M-CA20-000000 selection notes for the field connection, operating limits and service handover
Pepperl+Fuchs PCV000040M-CA20-000000 is a Data Matrix position code tape used for providing a coded path for optical position reading. This page identifies the representative designation and the checks that matter when the device is selected for a real installation. The common product montage is a category reference image, not a photograph of the exact PCV000040M-CA20-000000 unit. Compare the full label and current manufacturer data before committing a purchase or changing a live circuit.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Exact designation | PCV000040M-CA20-000000 |
| Product type | Data Matrix position code tape |
| Product form | Printed position code tape, not a powered sensor |
| Nominal tape length | 40 m from the PCV000040M designation |
| Reader system | Match the optical read head and its tape specification |
| Mounting | Check orientation, start position and substrate before installation |
| Variant boundary | Use the complete type code and current device label when selecting a replacement. |
Selection checkpoint: identify the complete PCV000040M-CA20-000000 code before comparing its field interface with an installed unit.
Interface and installation fit
For PCV000040M-CA20-000000, The tape and reader must share the same code system and installation geometry. Confirm reel length and start code against the purchase record. Review the mating equipment, supply path, mounting space, cable or terminal assignment and any required hazardous-area documentation. If the present installation has field-modified wiring or programming, photograph and record it before removal. The same-looking item can require different wiring or settings.
Operating role and application
In the intended system, PCV000040M-CA20-000000 is used for providing a coded path for optical position reading. Its role is not defined by the product picture or a shared prefix alone. Establish what arrives at the device, what leaves it and which controller, field instrument or mechanical component it must match. When PCV000040M-CA20-000000 is ordered as a spare, preserve the complete suffix and all installed configuration information.
Procurement and replacement details
When requesting PCV000040M-CA20-000000, Specify the exact PCV code and any required tape start/end or protective mounting detail. State operating environment, required certificates and the exact application. Request written confirmation for any proposed alternative. A reference model in the list below may belong to the same visible naming cluster but is not a default functional replacement for PCV000040M-CA20-000000.
Commissioning and maintenance
After fitting PCV000040M-CA20-000000, Read multiple positions along the applied tape, including splices and terminal sections. Record both the expected and observed behavior. Inspect indicators, fault response and controller diagnostics where provided. If the test does not match, verify wiring, configuration and connected equipment before assuming that a new PCV000040M-CA20-000000 is defective.
Related designation references
The following catalog designations share the visible PCV naming cluster with PCV000040M-CA20-000000. They are grouped to aid search and procurement, not to assert identical ratings, wiring, approvals or interchangeability. Each complete code must be checked separately against the required duty.
- PCV-KBL-V19-USB
Final selection check
For PCV000040M-CA20-000000, confirm the latest datasheet and nameplate before ordering or commissioning. Retain the loop drawing, configuration and acceptance record with the maintenance file. The technical values above apply to PCV000040M-CA20-000000 only where stated, not to every related designation.
